SPT5504CL Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – SLIC Power Module

Features
■ Powers ringing SLICs
■ Overcurrent protection
■ Surface mount design
■ Non-isolated outputs
■ Ultraquiet outputs
■ Superior transient response
■ 10 REN capability
SPT5504CL SLIC Power Module
■ Compact design
■ Simplifies assembly & test
■ Fast time-to-market
■ Remote inhibit
■ Eliminates ALEL caps
■ Patent 6,195,273
Input Specifications
Voltage ...................................4.75 VDC Min.
5 VDC Nom.
5.25 VDC Max.
Current
No Load..............................120 mA Nom.
140 mA Max.
IBAT1 = 100 mA .................1660 mA Nom.
1700 mA Max.
IBAT2 = 100 mA ...................750 mA Nom.
780 mA Max.
Disabled ................................20 mA Max.
Remote Enable
Low = Enable
.................0.4 VDC Max. (open = enable)
High = Disable
...................4.0 VDC Min. (source ≤1 mA)
Output Specifications
Power ......................................................7 W
VBAT1
Voltage .................................... -65 V Min.
-63 V Nom.
-61 V Max.
Current ..................................0 to 100 mA
10 REN (2 s on, 4 s off)
120 mA Min. (trip < 150 ms)
Ripple Voltage ...........................15 mV Nom.
30 mV Max.
(IBAT1 = 50 mA)
Temperature Coefficient (T -25 °C)
...................................... -20 mV/°C Nom.
-40 mV/°C Max.
VBAT2
Voltage (Two 50 mA Outputs)
................................................ -25 V Min.
-24 V Nom.
-23 V Max.
Current ..................................0 to 100 mA
Ripple Voltage ..........................5 mA Nom.
20 mA Max.
(IBAT2 = 50 mA)
Temperature Coefficient (T -25 °C)
.......................................1.2 mV/°C Nom.
4 mV/°C Max.
VBAT2 Load Regulation
(IBAT2 = 0 to 50 mA).......0.5 mV/mA Nom.
1 mV/mA Max.
VBAT2 Setpoint Accuracy.............2 % Nom.
4 % Max.
Cross Regulation (IBAT1 = 0 to 100 mA)
......................................0.1 mV/mA Nom.
0.2 mV/mA Max.
General Specifications
MBTF .................................2,100 kHrs Nom.
Bellcore TR332 (40 °C)
Operating Temperature
0 LFM..................................-40 to +85 °C
Storage Temperature...........-55 to +125 °C
General Information
The SPT5504CL is a member of Bourns
Switch Power SLIC Power module family.
The output voltages provide low-noise
operation for very quiet off-hook conditions
and on-hook transmissions. The SPT5504CL
is capable of 7 W total output power, with up
to 100 mA available from each output rail.
The SPT5504CL’s easy to use surface
mount design and compact footprint
Output Decoupling
Although not specifically required for
proper/specified operation of the
SPT5504CL, external decoupling capacitors
may be employed to reduce noise and
interaction with adjacent circuits. Output
decoupling can be achieved by placing 0.1
µf ceramic caps at the load. Note that larger
cap values can substantially increase the
start-up currents drawn from the 5 V source.
Input Decoupling
Local input decoupling is recommended to
reduce the apparent source impedance to
the SPT5504CL.
C2 0.1 µF, X7R ceramic
C1 100 µF, 10 V, low ESR tantalum (AVX
TPS series or Kemet T495 series).
minimize the board space dedicated to
power (less than 1.4 in²). Its robust design
ensures reliable power and eliminates the
need for Aluminum Electrolytic capacitors.
By integrating the entire power solution, the
OEM customer saves time and money in
engineering, debugging, purchasing hard-
to-source components, test and inventory.
Fault Protection
F1 may be used in distributed systems to
isolate single-board failures.
F1 should be ≥ 2.5 A, i²t ≥ 0.2 A² sec,
R ≤ 25 mΩ.
Product Dimensions
1
24.38
(0.96)
8
36.1
(1.42)
16
2.54 _{14 PLCS.}
(0.100)
31.8
(1.250)
3.30 _{4 PLCS.}
(0.13)
9
1.0 _TYP.
(0.040)
11.18 _MAX.
(0.44)
DIMENSIONS = ^MILLIMETERS
(INCHES)
TOLERANCES = (.xx) = ± ^.25
(.01)
(.xxx) = ± ^.13
(.005)
2.54
(0.100)
14 PLCS.
2.54 _TYP.
(0.100)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.