SMCJ50CA_13 Datasheet, PDF (1/5 Pages) Bourns Electronic Solutions – Transient Voltage Suppressor Diode Series

*RoHS ^COMPLIANT
Features
■ RoHS compliant*
■ Surface Mount SMC package
■ Standoff Voltage: 5.0 to 495 volts
■ Power Dissipation: 1500 watts
Applications
■ IEC 61000-4-2 ESD (Min. Level 4)
■ IEC 61000-4-4 EFT
■ IEC 61000-4-5 Surge
SMCJ Transient Voltage Suppressor Diode Series
General Information
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC)
size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 495 V and Breakdown
Voltage up to 550 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices
from 0 V to Minimum Breakdown Voltage.
Bourns^® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration
minimizes roll away.
Electrical Characteristics (@ T_A = 25 °C Unless Otherwise Noted)
Parameter
Minimum Peak Pulse Power Dissipation (TP = 1 ms) ^{(Note 1,2)}
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) ^{(Note 3)}
Steady State Power Dissipation @ TL = 75 °C
Maximum Instantaneous Forward Voltage @ I_PP = 100 A
(For Unidirectional Units Only)
Operating Temperature Range
Storage Temperature Range
Symbol
P_PK
I_FSM
P_M(AV)
V_F
T_J
T_STG
Value
1500
200
5.0
(Note 5)
-55 to +150
-55 to +175
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.
5. V_F = 3.5 V on SMCJ5.0A through SMCJ90A and V_F= 5.0 V on SMCJ100A through SMCJ495A.
Unit
Watts
Amps
Watts
Volts
°C
°C
Asia-Pacific:
Tel: [phone]
Fax: [phone]
Europe:
Tel: [phone]
Fax: [phone]
The Americas:
Tel: [phone]
Fax: [phone]
www.bourns.com
How to Order
Package
SMCJ = SMC/DO-214AB
Working Peak Reverse Voltage
5.0 = 5.0 VRWM (Volts)
Suffix
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
SMCJ 5.0 CA
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.