SM-LP-5002 Datasheet, PDF (1/1 Pages) Bourns Electronic Solutions – Surface Mount Line Matching Transformers

*RoHS
COMPLIANT
C11S2M•U5^B _S-L^O_PU _{-5R 00N2S}
Features
■ 7.36 mm seated height
■ Distortion of only 0.015 %
■ Vacuum encapsulated
■ Weight - 2 g
■ UL60950 approved
■ RoHS compliant*
Applications
■ Modems (V34 and V92)
■ Laptop Computers
■ Telecommunications
■ Instrumentation
SM-LP-5002 Series -Surface Mount Line Matching Transformers
Electrical Specifications
Nominal Impedance ..................... 600 Ω
Turns Ratio ........................................1:1
Insertion Loss ....... 2.0 dB max. at 2 kHz
Frequency Response
...................±0.25 dB max. 200-4 kHz
Return Loss ........24 dB min. 200-4 kHz*
Balance................................. 80 dB min.
Distortion ............................ -85 dB max.
@ 600 Hz, -10 dBm
Dielectric Strength
.........................2000 VRMS for 1 min.
Insulation Resistance
.................................100 MΩ @ 500 V
DC Resistance**
Primary.......................... 136 Ω ±12 %
Secondary..................... 136 Ω ±12 %
Shunt Inductance .................. 3.8 H min.
Shunt Loss ......................... 7500 Ω min.
Leakage Inductance
.............................6-7 mH typ. @ 1 kHz
Power Level............................... 10 dBm
Operating Temperature
................................. -20 °C to +85 °C
Storage Temperature
................................. -40 °C to +85 °C
Materials
Terminal Plating ............................. AgSn
*For use with recommended circuit
(BS6305 impedance Class A non-
speech or Class B speech).
**SM-LP-5002 is symetrical, meaning
there is no real primary nor secondary
winding.
Product Dimensions
12.5
(.492)
0.3
(.012)
1.0
(.039) 7.36
(.290)
2.54
(1.00)
1
2
3
1.0 +0.25/-0.0
(.039 +.010/-0.0)
1.1
(.043)
0.6 ± 0.5
(.023 ± .020)
6
5 ^9.6 MAX.
(.378)
4
Suggested PCB Layout
2.5
(.098)
1.2
(.047)
14.5
(.453)
2.54
(.100)
How To Order
SM-LP-5002 __
Model
Packaging
Blank = Packaged in tubes
E = Tape and reel (400 pcs. per reel)
DIMENSIONS:
MM
(INCHES)
LEAD COPLANARITY:
0.15
(.006)
MAX.
UNLESS OTHERWISE ±0.25
SPECIFIED, TOLERANCE: (.010)
MAX.
Schematic
1
6
2
5
3
4
REV. 04/11
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications