SF-0603S200-2 Datasheet, PDF (1/4 Pages) Bourns Electronic Solutions – SinglFuse™ SF-0603S Series Features

*RoHS ^COMPLIANT
SinglFuse^™ SF-0603S Series Features
■ Single blow fuse for overcurrent
protection
■ Surface mount packaging for automated
assembly
■ 1608 (EIA 0603) miniature footprint
■ Slow blow fuse
■ UL listed
■ RoHS compliant* and halogen free**
■ Thin film chip fuse
SF-0603S Series - Slow Blow Surface Mount Fuses
Electrical Characteristics
Model
Rated Current
(Amps)
SF-0603S050
0.50
SF-0603S063
0.63
SF-0603S080
0.80
SF-0603S100
1.00
SF-0603S125
1.25
SF-0603S150
1.50
SF-0603S160
1.60
SF-0603S200
2.00
SF-0603S250
2.50
SF-0603S300
3.00
SF-0603S315
3.15
SF-0603S400
4.00
SF-0603S500
5.00
Fusing Time
Open within 5 sec.
at 250 % rated
current
Resistance
(mΩ) Typ.***
175
130
93
65
47
36
34
26
20
16
15
12
9
Rated Voltage Breaking Capacity
DC 50 V
DC 50 V
50 A
DC 32 V
DC 32 V
50 A
Typical
I²t (A²s)
0.009
0.017
0.024
0.026
0.057
0.081
0.086
0.115
0.200
0.210
0.279
0.326
0.622
***Resistance value was measured with less than 10 % of rated current.
Reliability Testing
Parameter
Requirement
Test Method
Carrying Capacity ..................................... No fusing....................................................Rated current, 4 hours
Fusing Time .............................................. Within 5 seconds........................................250 % of its rated current
Interrupting Ability ..................................... No mechanical damages ...........................After the fuse is interrupted, rated voltage applied for
30 seconds again
Bending Test............................................. No mechanical damages ...........................Distance between holding points: 90 mm,
Bending: 3 mm,1time, 30 seconds
Resistance to Solder Heat........................ ±20 %.........................................................260 °C ±5 °C,10 seconds ±1 second
Solderability .............................................. 95 % coverage minimum ...........................235 °C ±5 °C, 2 ±0.5 second
245 °C ±5 °C, 2 ±0.5 second (lead free)
Temperature Rise ..................................... <75 ° ..........................................................100 % of its rated current, measure of surface
temperature
Resistance to Dry Heat............................. ±20 %.........................................................105 °C ±5 °C,1000 hours
Resistance to Solvent............................... No evident damage on protective ..............23 °C ±5 °C of isopropyl alcohol, 90 seconds coating
and marking
Residual Resistance................................. 10k W or more ...........................................Measure DC resistance after fusing
Thermal Shock ......................................... DR < 10 % .................................................-20 °C / +25 °C /+125 °C /+25 °C, 10 cycles
Typical Part Marking
How to Order
Represents total content. Layout may
vary.
SF - 0603 S 050 - 2
SinglFuse™
Product Designator
Asia-Pacific:
Tel: [phone]
RATING CURRENT (A)
F = 0.50 S = 2.00
I = 0.63 T = 2.50
K = 0.80 3 = 3.00
L = 1.00 U = 3.15
M = 1.25 W = 4.00
P = 1.50 Y = 5.00
N = 1.60
SMD Footprint
1608 (EIA 0603) size
Fuse Blow Type
F = Fast acting
S = Slow blow
Rated Current
050-500 (500 mA - 5.00 A)
Packaging Type
- 2 = Tape & Reel (5,000 pcs./reel)
* RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Fax: [phone]
Europe:
Tel: [phone]
Fax: [phone]
The Americas:
Tel: [phone]
Fax: [phone]
www.bourns.com
** Bourns is using the definition that appears to be the prevalent definition used as the industry standard at this time. The Bourns definition of “halogen-free” is:
Bromine (Br) content: ≤ 900 ppm; Chlorine (Cl) content: ≤ 900 ppm; Total Br + Cl content: ≤1500 ppm.
“SinglFuse” is a trademark of Bourns, Inc.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.