PTVS6-058C-SH Datasheet, PDF (1/3 Pages) Bourns Electronic Solutions – High Current TVS Diodes

*RoHS ^COMPLIANT
Features
■ 6 kA, 8/20 µs surge capability
■ Low clamping voltage under surge
■ Bidirectional TVS
■ Surface mount package
Applications
■ High power DC bus protection
PTVS6-xxxC-SH Series High Current TVS Diodes
General Information
The PTVS6-xxxC-SH range of high current bidirectional TVS diodes is designed for use in high power
DC bus clamping applications. These devices offer bidirectional port protection and are available with
standoff voltage ratings of 58 V and 76 V.
The devices are RoHS* compliant. They also meet IEC 61000-4-5 8/20 μs current surge requirements.
Absolute Maximum Ratings (@ T_A = 25 °C Unless Otherwise Noted)
Rating
Repetitive Standoff Voltage
Peak Current Rating per 8/20 μs IEC 61000-4-5
Operating Junction Temperature Range
Storage Temperature Range
PTVS6-058C-SH
PTVS6-076C-SH
Electrical Characteristics (@ T_A = 25 °C Unless Otherwise Noted)
Parameter
I_D Standby Current
V_(BR) Breakdown Voltage
V_C Clamping Voltage ⁽¹⁾
V_(BR) Temperature Coefficient
C Capacitance
Test Conditions
V_D = V_WM
I_BR = 10 mA
PTVS6-058C-SH
PTVS6-076C-SH
I_PP = 3 kA
PTVS6-058C-SH
PTVS6-076C-SH
F = 10 kHz,
V_d = 1 Vrms
PTVS6-058C-SH
PTVS6-076C-SH
(1) V_C measured at the time which is coincident with the peak surge current.
Symbol
Value
Unit
V_WM
58
76
V
I_PPM
6
kA
T_J
-55 to +125
°C
T_S
-55 to +150
°C
Min.
Typ.
Max.
Unit
10
μA
64
85
67
90
70
95
V
110
140
V
0.1
%/°C
4.5
3.3
nF
Asia-Pacific: Tel: [phone] • Fax: [phone]
EMEA: Tel: [phone] • Fax: [phone]
The Americas: Tel: [phone] • Fax: [phone]
www.bourns.com
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.