English
Language : 

PTVS10-058C-SH Datasheet, PDF (1/3 Pages) Bourns Electronic Solutions – High Current TVS Diodes
*RoHS COMPLIANT
Features
■ 10 kA, 8/20 µs surge capability
■ Low clamping voltage under surge
■ Bidirectional TVS
■ Surface mount package
■ Excellent performance over temperature
Applications
■ High power DC bus protection
PTVS10-xxxC-SH Series High Current TVS Diodes
General Information
The PTVS10-xxxC-SH range of high current bidirectional TVS diodes is designed for use in high power
DC bus clamping applications. These devices offer bidirectional port protection and are available with
standoff voltage ratings of 58 V and 76 V.
The devices are RoHS* compliant. They also meet IEC 61000-4-5 8/20 μs current surge requirements.
Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted)
Rating
Repetitive Standoff Voltage
Peak Current Rating per 8/20 μs IEC 61000-4-5
Operating Junction Temperature Range
Storage Temperature Range
Symbol
Value
Unit
PTVS10-058C-SH
PTVS10-076C-SH
VWM
58
76
V
IPPM
10
kA
TJ
-55 to +125
°C
TS
-55 to +150
°C
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Parameter
ID Standby Current
V(BR) Breakdown Voltage
VC Clamping Voltage (1)
V(BR) Temperature Coefficient
C Capacitance
Test Conditions
VD = VWM
IBR = 10 mA
PTVS10-058C-SH
PTVS10-076C-SH
IPP = 10 kA
PTVS10-058C-SH
PTVS10-076C-SH
F = 10 kHz,
Vd = 1 Vrms
PTVS10-058C-SH
PTVS10-076C-SH
(1) VC measured at the time which is coincident with the peak surge current.
Min.
64
85
Typ.
67
90
0.1
8
6
Max.
10
70
95
110
140
Unit
μA
V
V
%/°C
nF
Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116
EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211
The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700
www.bourns.com
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
 ▷