PTS Datasheet, PDF (1/6 Pages) Bourns Electronic Solutions – High Grade Slide Potentiometer

*RoHS ^COMPLIANT
Features
■ High grade, long life
■ Single and dual gang
■ Assortment of resistance tapers
■ Tracking error within ±3 dB
■ 45, 60 and 100 mm sizes
■ Wide operating temperature range
■ T-bar lever option
PTS Series High Grade Slide Potentiometer
Electrical Characteristics
Standard Resistance Range
....................... 1K ohms to 1 megohm
Standard Resistance Tolerance... ±20 %
End Resistance ...................1 ohm max.
Insulation Resistance @ 500 VDC
............................. 100 megohms min.
Dielectric Withstanding Voltage
............................................ 1000 VAC
Tracking Error ............................... ±3 dB
Standard Taper .................. Linear, Audio
Power Rating
Linear ..................................... 0.5 watt
Audio.................................... 0.25 watt
Slider Noise .........................60 mV max.
Environmental Characteristics
Operational Life ..............100,000 cycles
TR Shift .................................... ±15 %
Operating Temperature Range
................................. -10 °C to +55 °C
Resistance to Solder Heat............. ±5 %
Mechanical Characteristics
Mechanical Travel........ Length ±0.5 mm
Operating Force .............................60 gf
Stop Strength ......................... 5 kgf min.
Shaft Axial Force .................. 10 kgf min.
Shaft Wobble.. 2(2 x L/25) mm p-p max.
Soldering Condition
Manual ...........300 °C ±5 °C for 3 sec.
Wave ..............260 °C ±5 °C for 5 sec.
Wash .....................Not recommended
Product Dimensions
45 mm Length of Travel
Lever End Syle “A”
77.5
(3.052)
MAX.
65.0 ± 0.2
(2.559 ± .008)
M3 2 PLCS.
45.0 ± 0.5
(1.772 ± .020)
R ^0.3
(.012)
DIMENSIONS:
MM
(INCHES)
13.0 _MAX.
(.512)
Lever
Length
15.0
(.591)
20.0
(.787)
6.0 ± 0.2
(.157 ± .008)
4.0 +0/-0.1
(.157 +0/-.004)
10.0 ± 0.3
(.394 ± .012)
1.2 ± .05
(.047 ± .002)
L ± 0.5
(L ± .020)
38.7 ± 0.5
(1.524 ± .020)
HOLES
2.0
2 1 2'
(.079)
6 PLCS.
5.0
(.197)
5.0
(.197)
5.0
(.197)
12.5
(.492)
1'
6.8
(.268)
1.8 3'
3
(.071)
2 PLCS.
8.0
(.315)
20.0
(.787)
30.0
(1.181)
2.3 ± 0.2
(.091 ± .008)
3.7 ± 0.2
(.146 ± .008)
5.4 ± 0.2
(.213 ± .008)
0.5
(.020)
0.6
(.024)
Standard Resistance Table
Resistance
(Ohms)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
How To Order
PTS 45 - 0 2 L - 103 B2
Model Number
Designator
PTS = High Grade Slide
Potentiometer
Length of Travel
45 = 45 mm
60 = 60 mm
01 = 100 mm
Lever End Style/Length
0 = Lever End Style “A” / 15 mm
1 = Lever End Style “T” / 8.2 mm
2 = Lever End Style “A” / 20 mm
No. of Gangs
1 = Single Gang
2 = Dual Gang
Mounting Type
L = Solder Lugs
P = PC Pins
Resistance Code
(See Standard Resistance Table)
Resistance Taper (See Taper Charts)
Taper Series followed by Curve Number