PTL Datasheet, PDF (1/4 Pages) Bourns Electronic Solutions – PTL Series Slide Potentiometer w/LED

*RoHS ^COMPLIANT
LEAD ^FREE
Features
n Carbon element
n Red, orange, green, amber and white LED colors
n Center detent option
n Assortment of resistance tapers
n Various travellengths
n Various lever sizes
PTL Series Slide Potentiometer w/LED
Electrical Characteristics
Product Dimensions
Standard Resistance Range
........................ 1K ohms to 1 megohm
Standard Resistance Tolerance... ±20 %
End Resistance
20 mm Travel................ 10 ohms max.
LVEREAoRDHSSFIORCNEOSEMA^{2PRL0EIANmT*m}_(.395.^L_{04 ±±}^en_0.0.52^g₀^t₎^h
2.8
of
Travel
35.0 ±
(1.378 ±
31.0 ±
(1.220 ±
0.5
.020)
0.2
.008)
30 mm Travel................ 20 ohms max.
(.110)
27.0
45 mm Travel................ 20 ohms max.
(1.063)
60 mm Travel................ 30 ohms max.
1
Insulation Resistance @ 250 VDC
.............................. 100 megohms min.
Dielectric Withstanding Voltage
............................................... 300 VAC
Standard Taper................... Linear, Audio
Power Rating - Linear
20 mm Travel........................ 0.05 watt
30 mm Travel.......................... 0.1 watt
45 mm Travel...................... 0.125 watt
60 mm Travel.......................... 0.2 watt
Power Rating - Audio
20 mm Travel...................... 0.025 watt
30 mm Travel........................ 0.05 watt
M2 X ^0.4 2 PLCS.
(.016)
20.0 ± 0.5
(0.787 ± .020)
5.5
(.217)
6.6
(.260)
LED
MOUNTING
SURFACE
6.0 ± 0.1
(.236 ± .004)
1.0 ± 0.1
(.039 ± .004)
0.5
(.020)
45 mm Travel........................ 0.06 watt
60 mm Travel.......................... 0.1 watt
Slider Noise........................200 mV max.
0.4
(.016)
3.5 ± 0.5
(.138 ± .020)
3.0
(.118)
5.5 ± 0.1
(.217 ± .004)
L ± 0.5
(L ± .020)
7.0 ± 0.5
(.276 ± .020)
Environmental Characteristics
Operational Life.................15,000 cycles
TR Shift..................................... ±15 %
Operating Temperature Range
.................................. -10 °C to +55 °C
Resistance to Solder Heat............. ±5 %
Mechanical Characteristics
Mechanical Travel........ Length ±0.5 mm
Operating Force.............. 30 gf to 250 gf
Center Detent Force........ 20 gf to 200 gf
Stop Strength.......................... 5 kgf min.
Shaft Axial Force..................... 5 kgf min.
Shaft Wobble.. 2(2 x L/20) mm p-p max.
Soldering Condition
Manual............300 °C ±5 °C for 3 sec.
Wave...............260 °C ±5 °C for 5 sec.
Wash......................Not recommended
Mounting Hole Detail
7.5 ± 0.1
(.295 ± .004)
2.5 ± 0.1
(.098 ± .004)
30.0 ± 0.1
(1.181 ± .004)
2
1
3
L
E
B
HOLES
1.1 +0.2/-0
(.043 +.008/-0)
DIA. 6 PLCS.
Standard Resistance Table
Resistance
(Ohms)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
Schematic
R1 1
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
R1 1
R2 1'
Lever
Length
10.0
(.394)
15.0
(.591)
19.0
(.748)
DIMENSIONS:
MM
(INCHES)
2.05 ± 0.1
(.081 ± .004)
0.6
(.024)
2
3
2
3
3'
2'