PTE45-152A-103B2 Datasheet, PDF (1/3 Pages) Bourns Electronic Solutions – PTE Series Low Profi le Slide Potentiometer

*RoHS ^COMPLIANT
Features
■ Carbon element
■ Assortment of resistance tapers
■ 45 mm and 60 mm travel lengths
■ Single and dual gang elements
■ Long operational life
■ Tracking error within ±2 dB
■ Various lever styles
PTE Series Low Profile Slide Potentiometer
Electrical Characteristics
Standard Resistance Range
....................... 1K ohms to 1 megohm
Standard Resistance Tolerance... ±20 %
End Resistance ................. 2 ohms max.
Insulation Resistance @ 100 VDC
............................. 100 megohms min.
Dielectric Withstanding Voltage
.............................................. 250 VAC
Tracking Error ............................... ±2 dB
Standard Taper .................. Linear, Audio
Power Rating
Linear ..................................... 0.2 watt
Audio...................................... 0.1 watt
Slider Noise .......................100 mV max.
Environmental Characteristics
Operational Life ..............100,000 cycles
TR Shift .................................... ±15 %
Operating Temperature Range
................................. -10 °C to +55 °C
Resistance to Solder Heat............. ±5 %
Mechanical Characteristics
Mechanical Angle ...................300 ° ±5 °
Mechanical Travel........ Length ±0.5 mm
Operating Force .............................50 gf
Stop Strength ......................... 5 kgf min.
Shaft Axial Force .................... 5 kgf min.
Shaft Wobble.. 2(2 x L/25) mm p-p max.
Soldering Condition
Manual ...........300 °C ±5 °C for 3 sec.
Wave ..............260 °C ±5 °C for 5 sec.
Wash .....................Not recommended
Standard Resistance Table
Resistance
(Ohms)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
Product Dimensions
45 mm Length of Travel
Lever End Style “B”
72.0 ± 0.5
(2.835 ± 0.020)
65.0 ± 0.3
(2.559 ± 0.012)
57.0
(2.244)
M3 2 PLCS.
45.0 ± 0.5
(1.772 ± 0.020)
TRAVEL
10.0
(0.394)
8.5 ± 0.2
(0.335 ± 0.008)
1.0
(0.039)
0.5
(0.020)
0.5
(0.020)
4.9
(.193)
18.0
(.709)
3.8
(0.150)
18.0
(.709)
Mounting Hole Detail
72.5 ± 0.1
(2.854 ± 0.004)
2
1
1’
2’
1.5 +0.2/-0
(0.059 +0.008/-0)
DIA. 6 PLCS.
Schematics
Single Gang
2
R1 1
3
2.8
(0.110)
16.0 ± 0.5
(0.630 ± 0.020)
Lever
Length
15.0
(.591)
20.0
(.787)
DIMENSIONS:
MM
(INCHES)
3.0 ± 0.2
(0.118 ± 0.008)
4.0 +0.2/-0
(0.157 +0.008/-0)
5.0
(0.197)
1.2 ± 0.05
(0.047 ± 0.002)
8.0
3.8
(0.315) ^(0.150)
L ± 0.5
3.0
(0.118)
(L ± 0.020)
10.0 ± 0.5
(0.394 ± 0.020)
4.1
(0.161)
MOUNTING
SURFACE
3.75 ± 0.1
(0.148 ± 0.004)
11.25 ± 0.1
(0.443 ± 0.004)
3
3’
2.1
(0.083)
1.0
(0.039)
Dual Gang
2
R1 1
3
R2 1'
3'
2'
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.