PTD90_14 Datasheet, PDF (1/3 Pages) Bourns Electronic Solutions – 9 mm Multi-Ganged Potentiometer

*RoHS ^COMPLIANT
Features
■ Carbon element
■ Ganging up to 8 sections available
■ Knurled and flatted shaft styles
■ Audio taper option
■ Tracking error within 3 dB
■ RoHS compliant*
PTD90 Series - 9 mm Multi-Ganged Potentiometer
Electrical Characteristics
Standard Resistance Range
....................... 1 K ohms to 1 M ohms
Total Resistance Tolerance
.................................±10 % or ±20 %
Standard Tapers ................Linear & audio
Maximum Operating Voltage
............................... 150 VAC, 20 VDC
Rated Power
Linear Taper .......................0.05 watts
Audio Taper......................0.025 watts
Noise .................................. 100 mV max.
Insulation Resistance @ 250 VDC
....................................... 100 M ohms
Dielectric Withstanding Voltage
..............................................300 VAC
End Resistance .................20 ohms max.
Tracking Error (-40 dB to 0 dB).......±3 dB
Environmental Characteristics
Operating Temperature
.................................-10 °C to +50 °C
Rotational Life ................... 15,000 cycles
IP Rating.......................................... IP 40
Mechanical Characteristics
Mechanical Angle ...................300 ° ±10 °
Running Torque ...............10 to 250 g-cm
Stop Strength .......................... 4.0 kg-cm
Shaft Push/Pull Strength .......5.0 kgf min.
Shaft Wobble.....0.6 x L/20 mm p-p max.
Mounting Torque ............. 7.0 kg-cm min.
Soldering Condition
Manual Soldering
........96.5 Sn/3.0 Ag/0.5 Cu solid wire
or no-clean rosin cored wire
270 °C max. for 3 seconds
Wave Soldering
............. 96.5 Sn/3.0 Ag/0.5 Cu solder
with no-clean flux
260 °C max. for 5 seconds
Wash Process ...... Not recommended
Mounting Hardware........ One flat washer
and one mounting nut supplied
per potentiometer
Product Dimensions
PTD901
7.05 ± 0.5
(.278 ± .020)
M7XP0.75
R1
0.8 ± 0.2
(.031 ± .008)
5.0
(.197)
RECOMMENDED PCB LAYOUT
DIA. HOLES
3 PLCS.
3
1.0 +0.2/-0
2
(.039 +.008/-0)
1
5.0
(.197)
R1
5.0
(.197)
MOUNTING
SURFACE
SCHEMATIC
2
R1 1
3
Derating Curve
100
80
60
40
33
20
0
0 10 20 30 40 50 60 70 80 90 100
Ambient Temperature (°C)
PTD902
9.65 ± 0.5
(.380 ± .020)
M7XP0.75
R2
R1
0.8 ± 0.2
(.031 ± .008)
5.0
2.5 ^(.197)
(.098)
RECOMMENDED PCB LAYOUT
DIA. HOLES
6 PLCS.
1.0 +0.2/-0
(.039 +.008/-0)
33
5.0
(.197)
22
11
MOUNTING
SURFACE
5.0
(.197)
2.5
R2 R1 ^(.098)
SCHEMATIC
2
R1 1
R2 1'
3
3'
2'
DIMENSIONS:
MM
(INCHES)
Standard Resistance Table
Resistance
(Ohms)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.