PTB0143-2010BPA102 Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Low Profi le Slide Potentiometer

*RoHS ^COMPLIANT
Features
■ Carbon element
■ Metal housing
■ 45-100 mm travel
■ Single and dual gang
■ Dust cover option
■ RoHS compliant*
PTB Series - Low Profile Slide Potentiometer
Electrical Characteristics
Taper.................................... Linear, audio
Standard Resistance Range
......................5K ohms to 200K ohms
Standard Resistance Tolerance.....±20 %
Residual Resistance
....................... 500 ohms or 1 % max.
Insulation Resistance
........ Min. 100 megohms at 250 V DC
Environmental Characteristics
Operating Temperature
...................................-10 °C to +60 °C
Power Rating, Linear
45 mm ....0.125 W (0.06 W Dual Gang)
60 mm ...................... 0.25 W (0.125 W)
100 mm .......................... 0.5 W (0.5 W)
Power Rating, Audio
45 mm ..0.025 W (0.015 W Dual Gang)
60 mm ...................... 0.25 W (0.125 W)
100 mm ...................... 0.25 W (0.25 W)
Maximum Operating Voltage - Linear
45 mm ................................... 350 VDC
60-100 mm............................ 500 VDC
Maximum Operating Voltage - Audio
45 mm ................................... 250 VDC
60-100 mm Travel ................. 350 VDC
Withstand Voltage, Audio
............................... 1 Min. at 500 V AC
Tracking Error......... 3 dB at 50 % of travel
Mechanical Characteristics
Operating Force ............. 10 to 100 g-cm
Stop Strength ..................... 5 kg-cm min.
Sliding Life......................... 15,000 cycles
Soldering Condition
............ 300°C max. within 3 seconds
Travel ............................... 45, 60, 100mm
Derating Curve
100
80
60
40
33
20
0
0 10 20 30 40 50 60 70 80 90 100
Ambient Temperature (°C)
Product Dimensions
PTB45 and PTB60
1
88.0
(3.46)
80.0
(3.14)
2 - M3 x 0.5
3
16.0
(.629)
45.0 or 60.0 TRAVEL
(1.77 or 2.36)
87.5
(3.44)
L
8.0
(.314)
4.0
(.157)
87.5
(3.44)
51.7
2
(2.03)
11.25
1
(.442)
1
2.0 +0.2 / -0.0 DIA. HOLES
2
(.078 +0.007 / -0.0) ^{2 PLCS.}
3.1 +0.2 / -0.0 DIA. HOLES
(.122 +0.007 / -0.0) ^{6 PLCS.}
3
3
3.75
(.147)
Numbers 1 , 2 and 3 for Dual Gang Versions
Lever Style
BP Metal Lever
8.0
(.314)
AP Metal Lever
4.0
(.157)
1.0
(.039)
2-(RO .75)
10.0
(.393)
(RO .5)
2-CO .5
Thickness = 1.2 mm
8.0
(.314)
Thickness = 1.2 mm
10.0
(.393)
DIMENSIONS:
MM
(INCHES)
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.