PSP Datasheet, PDF (1/2 Pages) Powerbox – 2 0 0 WAT T P R O G R A M A B L E S W I T C H I N G

*RoHS ^COMPLIANT
Features
■ Extra long life element
■ Assortment of resistance tapers
■ 100 mm travel length
■ Touch sense lever
■ Snap-in connector
PSP Series Motorized Master Slide Potentiometer
Electrical Characteristics
Standard Resistance Range
.................... 10K ohms to 100K ohms
Standard Resistance Tolerance... ±20 %
End Resistance ...................1 ohm max.
Insulation Resistance @ 500 VDC
............................. 100 megohms min.
Dielectric Withstanding Voltage
............................................ 1000 VAC
Standard Taper .................. Linear, Audio
Power Rating - Linear................ 0.5 watt
Power Rating - Audio .............. 0.25 watt
Slider Noise .........................60 mV max.
Touch Sense Track
Conductive Resistance
Snap-in Connector....... 10 ohms max.
Environmental Characteristics
Operational Life ...........1,000,000 cycles
TR Shift .................................... ±15 %
Operating Temperature Range
................................. -10 °C to +70 °C
Mechanical Characteristics
Mechanical Travel........ 100 mm ± 1 mm
Operating Force
100 mm Travel.............................50 gf
Stop Strength ......................... 5 kgf min.
Motor Drive Characteristics
Rated Voltage .............................10 VDC
Operating Voltage Supply .. 6 to 11 VDC
Maximum Current..............800 mA max.
Lever Speed @ 10 VDC
...................................20 mm/0.1 sec.
Product Dimensions
7.0
(.276)
83.0
(3.268)
74.0
(2.913)
14.0
(.551)
1.8
33.5 (.071)
(1.319)
120.0 ± 0.5
(4.724 ± .020)
100.0 ± 1.0
(3.937 ± .039)
TRAVEL
2.0
(.079)
4.0
(.157)
18.5
(.728)
14.5
(.571)
8.0
(.315)
M3 x
0.50
(.020)
2 PLCS.
8.2 ± 0.5
(.323 ± .020)
14.0
(.551)
7.0
(.276)
B
7.0
(.276)
39.3
(1.547)
43.0
(1.693)
A
75.0
(2.953)
53.8
(2.118)
64.0
(2.520)
DIMENSIONS:
MM
(INCHES)
4.2
(.165)
25.0
(.984)
20.0
(.787)
2.5
(.098)
A B 3 1 2 T 1’ 2’ 3’
(+) (-)
5.1
(.201)
1.2 ± 0.05
(.047 ± .0002)
1.5 +0/-0.1
(.059 +0/-.004)
A DETAIL
B DETAIL
2.0
(.079)
DIA.
2 PLCS.
Standard Resistance Table
How To Order
Asia-Pacific:
Tel: [phone]
Email: [e-mail]
Europe:
Tel: [phone]
Email: [e-mail]
The Americas:
Tel: [phone]
Email: [e-mail]
www.bourns.com
Resistance
(Ohms)
10,000
20,000
50,000
100,000
Resistance
Code
103
203
503
104
PSP 01 - 08 2 A - 103 B2
Model Number
Designator
PSP = Motorized
Master Slide
Potentiometer
Length of Travel
01 = 100 mm
Lever Length
08 = 8.2 mm
Terminal Type
2 = Snap-in Connector
Lever End Style
A = Metal Lever (Refer to Drawing)
Resistance Code
(See Standard Resistance Table)
Resistance Taper (See Taper Charts)
Taper Series followed by Curve Number
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.