P650-U Datasheet, PDF (1/6 Pages) Bourns Electronic Solutions – Extremely high speed performance

*RoHS ^COMPLIANT
Features
■ Formerly
brand
■ Extremely high speed performance
■ Blocks high voltages and currents
■ Low insertion loss
■ Two TBU^™ protectors in one small package
■ Very high bandwidth; GHz compatible
■ RoHS compliant*, UL Recognized
Applications
■ Mb Ethernet port protection
■ Gb Ethernet port protection
■ Isolated and floating interfaces
TBU^™ P650-U and P850-U Protectors
Transient Blocking Units - TBU^™ Devices
Bourns^® Model P650-U and P850-U products are high speed,
unidirectional protection components, constructed using
MOSFET semiconductor technology, designed to protect against
faults caused by short circuits, AC power cross, induction and
lightning surges.
The TBU^™ high speed protector, triggering as a function of the
MOSFET, blocks surges and provides an effective barrier behind
which sensitive electronics are not exposed to large voltages or
currents during surge events. The TBU^™ device is provided in a
surface mount DFN package and meets industry standard
requirements such as RoHS and Pb Free solder reflow profiles.
Agency Approval
UL recognized component File # E315805.
Industry Standards
Description
Telcordia GR-1089
Port Type 3, 5
Port Type 2, 4
ITU-T
K.20, K.20E, K.21, K.21E,
K.45
Absolute Maximum Ratings (T_amb = 25 °C)
Symbol
V_imp
V_rms
T_op
T_stg
Parameter
Maximum protection voltage for impulse faults with rise time ≥ 1 µsec
Maximum protection voltage for continuous V_rms faults connected as
a series pair (refer to page 3 Test Configuration Diagram)
Operating temperature range
Storage temperature range
P650-Uxxx-WH
P850-Uxxx-WH
P650-Uxxx-WH
P850-Uxxx-WH
Value
650
850
300
425
-40 to +85
-65 to +150
Model
P650-U
P850-U
P850-U
Unit
V
V
°C
°C
Electrical Characteristics (T_amb = 25 °C)
Symbol Parameter
Min.
Typ.
Max.
Unit
P650-U180-WH
180
I_op
Maximum current through the device that will not cause
current blocking
P650-U260-WH
P850-U180-WH
260
180
mA
P850-U260-WH
260
P650-U180-WH
220
I_trigger
Typical current for the device to go from normal operating
state to protected state
P650-U260-WH
P850-U180-WH
330
220
mA
P850-U260-WH
330
P650-U180-WH
360
I_out
Maximum current through the device
P650-U260-WH
P850-U180-WH
520
360
mA
P850-U260-WH
520
R_TBU
Series resistance of the TBU^™ device
P650-Uxxx-WH
P850-Uxxx-WH
6
8
7
9
Ω
R_bal
t_block
Line-to line series resistance difference between two TBU^™ device
Maximum time for the device to go from normal operating P650-Uxxx-WH
state to protected state
P850-Uxxx-WH
0.5
Ω
1
µs
I_quiescent
Current through the triggered TBU^™ device with 50 Vdc circuit
voltage
1
mA
V_reset
Voltage below which the triggered TBU^™ device will
transition to normal operating state
P650-Uxxx-WH
P850-Uxxx-WH
11
14
V
The P-U Series TBU^™ devices are unidirectional; specifications are valid for input direction only. For the output direction, the TBU^™ device is
a resistor.
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.