LM-LP-1001L Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Line Matching Transformers

*RoHS ^COMPLIANT
LM-NP-1001-B1
Features
■ Fully encapsulated
■ Low profile
■ High dielectric strength
■ Ten models available
■ Ex stock
■ Competitively priced
■ RoHS compliant*
Applications
■ Line matching
■ Fax modem
LM-NP/-LP 1000 Series - Line Matching Transformers
Product Dimensions
4 321
WHITE MARK
17.7 ⁺ 0.2
(.700 ⁺ .008)
2.5
(.100)
12.7 ⁺ 0.15
(.500 ⁺ .006)
5 6 78
17.7 ⁺ 0.2
(.700 ⁺ .008)
DIA
0.6
(.023)
2.5
(.100)
LM-NP SERIES
12.6 + 0.2
(.496 + .008)
LM-LP SERIES
and LM-NP-1001-B1
10.5 + 0.2
(.413 + .008)
3.0
(.118)
3.0
(.118)
3.2 ± 0.8
(.126 ± .031)
5.04 * * * ^5.04
(.200)
(.200)
*:pitch = 1/10 " = 2.54 (.100) (for number of pins see pin assignment)
DIMENSIONS:
MM
(INCHES)
Pin Assignment and Winding Configurations (Bottom View)
LM-NP-1001-B1L
LM-LP-1001L
LM-NP-1002L
LM-LP-1002L
LM-NP-1003L
LM-LP-1003L
Note
The LM-NP/-LP-1000 Series Line
Matching Transformers meet the return
loss specifications of BS 6305.
It is important, however, to use the
circuit recommended by BS 6305 for
return loss measurements.
The LM-NP-1000 Series are EN 41003
approved.
How To Order
LM-xP-100x0xx L
Model
Termination
L = Tin only (RoHS Compliant)
LM-NP-1004L
LM-LP-1004L
LM-NP-1005L
LM-LP-1005L
one-winding
center-tapped*
one winding
split*
both windings
center-tapped
both windings
split
* Due to the unique design and the most advanced manufacturing techniques the 2 coils are fully identical, meaning there is no real
primary nor secondary winding. Depending on the application, the transformers can be used either way.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications