H-83P Datasheet, PDF (1/5 Pages) Bourns Electronic Solutions – Factory Installed Panel Mount

Factory Installed Panel Mount
TRIMPOT^® POTENTIOMETER
PANEL MOUNTING OPTIONS
AND HARDWARE
Many Trimpot^® Potentiometers are
available for panel mount application.
This product option provides for
maximum design flexibility.
To order Trimpot^® Potentiometers with
panel mount hardware attached by the
factory, simply add an “M” or “Z”
suffix to the Bourns part number per
Table I.
Example:
3006P-1-100Z
To order military Trimpot^® Potentiometers
with panel mount hardware attached by
the factory, order the military part
number and add “with panel mount
attached.”
Example:
RT12C2PRC, with panel mount
attached.
To order panel mounting accessories for
customer installation, simply use the part
number per Table II.
Example:
H83P
NOTE: For complete product specifica-
tions, see data sheet for the trimmer
model.
Torque - Apply maximum 8 in. lbs. on
mounting nut when mounted on panel.
Models RT12/RJ12, 3057/3059
10.31
(.406)
MAX.
HEX NUT AND
LOCKWASHER
7.95
(.313)
33.35
(1.31)
6.35
(.25)
BUSHING
10-32
NF-2 THD
6.76 ± .38
(.266 ± .015)
1.52 TO 3.30
(.06 TO .13)
5.94
(.234)
ADJ. SLOT
2.54
(.100)
LONG
.635
(.020)
WIDE
.762
(.030)
DEEP
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
2. RECOMMEND PANEL HOLES. #10 DRILL ^.194
(.008)
Models 3005/3006/3009
6.35
(.25)
20.32
(.80)
#10-32 UNF-2A THD.
2.54
(.100)
ADJ. SLOT
2.54
(.100
)
LONG
.508
(.020)
WIDE
.762
(.030)
DEEP
3.81
(.150)
7.92
(.312)
PANEL ^3.30 MAX.
(0.13)
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
.200
2. RECOMMEND PANEL HOLE SIZE #7 DRILL _(.008)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.