CRT0603-CV-1003ELF Datasheet, PDF (1/4 Pages) Bourns Electronic Solutions – Thin Film Precision Chip Resistors

*RoHS ^COMPLIANT
Features
■ Ultra-tight tolerance
■ Wide resistance range
■ RoHS compliant*
■ Four package sizes available
Applications
■ Current sense
■ Precision circuits
■ Medical equipment**
■ Printers
■ Automation equipment
■ Navigation equipment
CRT Series - Thin Film Precision Chip Resistors
Electrical Characteristics
Characteristic
Power Rating @ 70 °C
Operating Temperature Range
Derated to Zero Load at
Maximum Working Voltage
Maximum Overload Voltage
Resistance Range
(E-96 + E-24 Values)
Temperature Coefficient
of Resistance (TCR)
Model
CRT0402
1/16 watt
25 V
50 V
Model
CRT0603
1/16 watt
-55 to +155 °C
+155 °C
50 V
100 V
Model
CRT0805
1/10 watt
100 V
200 V
(See Standard Values Table)
Model
CRT1206
1/8 watt
150 V
300 V
5 to 50 PPM/°C (See Value - TCR Table on Pages 2 & 3)
Environmental Characteristics
Specification
Short Time Overload
Load Life
Humidity (Steady State)
Thermal Shock
Solderability
Resistance to Soldering Heat
Test (MIL STD 202)
2.5 x Max. Operating Voltage for 5 seconds
1000 Hours at Rated Power
Method 103B
Method 107
Method 208H
Method 210E
Limit (ΔR)
(Tol. ≤ 0.05 %)
±0.05 %
±0.05 %
±0.05 %
±0.05 %
±0.05 %
Limit (ΔR)
(Tol. > 0.05 %)
±0.2 %
±0.5 %
±0.3 %
±0.3 %
±0.2 %
How to Order
CRT 0603 - C V - 1003 E LF
Model
(CRT = Thin Film Precision Chip Resistor
Size
•
•
•
•
0402
0603
0805
1206
Resistance Tolerance
F = ±1 % B = ±0.1 %
D = ±0.5 % A = ±0.05 %
C = ±0.25 % P = ±0.01 %
TCR (PPM/°C)
Z = ±50
Y = ±25
X = ±15
W = ±10
V = ±5
Resistance Value
<100 ohms: “R” represents decimal point
(example: 24R3 = 24.3 ohms)
≥100 ohms: First three digits are significant, fourth digit
represents number of zeroes to follow
(example: 8252 = 82.5K ohms)
Packaging
G = Paper tape (10K pcs.) on 7 ” plastic reel (CRT0402)
E = Paper tape (5K pcs.) on 7 ” plastic reel (CRT0603, CRT0805,
CRT1206)
Termination
LF = Tin-plated (RoHS compliant)
Derating Curve
100
80
60
40
20
0
-55
0
70
155
(°C) Ambient temperature
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Bourns^® products have not been specifically designed and tested for FDA Class III applications and their use in such applications is neither recommended nor supported.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.