CGA0402MLC-05E Datasheet, PDF (1/3 Pages) Bourns Electronic Solutions – ESD Protectors

*Ro&HSAECCOMAPPPLRIAONVTED
Features
■ AEC-Q200 qualified
■ ESD protection to IEC 61000-4-2 Level 4
■ <1 ns response time to ESD strike
■ Low leakage current
■ Extremely low capacitance (0.05 pF typ.)
■ Bidirectional device
■ Multi-strike capability
Applications
■ Camera links
■ Sensors
■ Touchscreen interfaces
■ GPS
■ Antennas
■ USB 3.0
■ High-speed communications buses
ChipGuard^® Automotive MLC Series - ESD Protectors
General Information
Bourns^® ChipGuard^® Automotive MLC Series is a sub-1 pF protector designed
specifically for use in automotive circuits requiring ESD protection. The CGA-MLC
series is available in industry standard 0402 and 0603 packages. In addition to its very
low capacitance, these protectors exhibit extremely fast response times to ESD events
making them ideal for protecting a wide array of high speed digitial electronic
applications.
The ChipGuard^® Automotive MLC Series is fully AEC-Q200 qualified and supported.
Electrical Characteristics @ 25 °C (unless otherwise noted)
Parameter
DC Working Voltage
Maximum Leakage Current
@ Max. VW(DC)
Typical Clamping Voltage (Note 1)
Typical Trigger Voltage (Note 1)
Typical Peak Voltage (Note 2)
Typical Capacitance @ 1 MHz, 1 Vrms
Response Time
ESD Protection:
Per IEC 61000-4-2 Level 4
Min. Contact Discharge
Min. Air Discharge
Typical ESD Withstand
Operating Temperature
Storage Temperature
Symbol
VW(DC)
IL
VC
VT
VP
CO
RT
CGA0402MLC-
05E
12E
24E
≤5
≤12
≤24
CGA0603MLC-
05E
12E
24E
≤5
≤12
≤24
<0.01
30
300
300
0.2
0.2
0.2
0.05
<1
TOPR
TSTG
±8
±15 (Note 3)
1000
-55 to +125
-55 to +125
Unit
V
μA
V
V
V
pF
ns
kV
kV
Pulses
˚C
˚C
Notes:
1. VT and VC measured using TLP (Transmission Line Pulse) method.
2. Peak voltage measured under ESD Test Conditions: IEC61000-4-2, 8 kV contact discharge.
3. IEC 61000-4-2 ESD Performance for CGA0603MLC-05E and CGA0603MLC-12E devices will meet minimum 100 reps.
Some shifting in characteristics may occur when tested over several hundred ESD pulses. All other part numbers listed will meet
IEC 61000-4-2 ESD Performance with minimum 1000 reps without degradation in performance.
Asia-Pacific: Tel: [phone] • Fax: [phone]
EMEA: Tel: [phone] • Fax: [phone]
The Americas: Tel: [phone] • Fax: [phone]
www.bourns.com
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.