CDDFN10-3324P Datasheet, PDF (1/5 Pages) Bourns Electronic Solutions – Surface Mount TVS Diode Array

*RoHS ^COMPLIANT
Features
■ RoHS compliant*
■ Low capacitance - 0.04 pF
(I/O to I/O)
■ ESD protection to IEC 61000-4-2 (Level 4)
Applications
■ HDMI 1.3, 1.4 and 2.0
■ DisplayPort
■ Digital Visual Interface (DVI)
■ SATA and eSATA
■ USB 3.0
■ Memory protection
■ SIM card ports
CDDFN10-3324P - Surface Mount TVS Diode Array
General Information
The Model CDDFN10-3324P device provides ESD, CDE and EFT protection for
high-speed data ports, meeting IEC 61000-4-2 (ESD) requirements. The Transient
Voltage Suppressor array, protecting up to four data lines, offers a Working Peak
Reverse Voltage of 3.3 V and a Minimum Breakdown Voltage of 4.5 V.
Pin
Pin
Pin
Pin
1
2
4
5
The DFN10 packaged device has an ultra-low typical capacitance of only 0.04 pF
between I/O lines. This allows it to be used for protecting sensitive components used on
high-speed interfaces. The small footprint of the device allows for flow-through routing
on the PCB, helping to maintain matched impedances of the high-speed data lines.
Pins
3, 8
Absolute Maximum Ratings (@ T_A = 25 °C Unless Otherwise Noted)
Parameter
Symbol
CDDFN10-3324P
Unit
Peak Pulse Power (t_p = 8/20 μS)
P_pp
30
W
Peak Pulse Current (t_p = 8/20 μS)
I_pp
4
A
Operating Temperature
T_J
-55 to +85
ºC
Storage Temperature
TSTG
-55 to +150
ºC
Electrical Characteristics (@ T_A = 25 °C Unless Otherwise Noted)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Working Peak Reverse Voltage
Breakdown Voltage @ 1 mA
Leakage Current @ V_WM
Capacitance @ 1.65 V, f = 1 MHz
(I/O to GND)
V_WM
3.3
V
V_BR
4.5
V
IR
0.1
0.5
µA
CIN
0.45
0.65
pF
Capacitance @ 1.65 V, f = 1 MHz
(I/O to I/O)
CCROSS
0.04
0.08
pF
Clamping Voltage @ 8/20 µs @ IPP
VC
ESD Protection per IEC 6-1000-4-2
Contact Discharge
Air Discharge
7.5
V
12
kV
15
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.