CDDFN10-0524P Datasheet, PDF (1/1 Pages) Bourns Electronic Solutions – HDMI 1.3 - ESD & Overcurrent Protection

Solution Products
CDDFN10-0524P
HDMI® Port
HDMI 1.3 - ESD & Overcurrent Protection
Objective
HDMI 1.3 interfaces are 3.3 V differential
digital signals with single-link bandwidths
up to 340 MHz (10.2 Gbit/s). As usage of
HDMI ports increases, HDMI ports face a
growing threat of ESD damage.
Compliance
IEC 61000-4-2 Level 4 (8 kV / 15 kV)
Alternate Recommendations
Other PortNote® Solutions:
• HDMI: HDMI 1.4 - ESD & Overcurrent Protection
Solution
2 TVS Diode Arrays: CDDFN10-0524P
1 TVS Diode Array: CDSOT236-0504LC
1 Multifuse® PPTC: MF-FSMF020X-2
Benefit
This solution provides IEC 61000 Level 4 ESD
protection without impairing the HDMI signal.
CDSOT236-0504LC
MF-FSMF020X-2
Design Kit
PN-DESIGNKIT 11
D2+
GND
D2-
D1+
GND
D1-
D0+
GND
D0-
CK+
GND
CK-
CE_REMOTE
NC
DDC_CLK
DDC_DAT
HOTPLUG_DET
GND
+5 V_OUT
CDDFN10-0524P
CDDFN10-0524P
CDSOT236-0504LC
MF-FSMF020X-2
The schematic above illustrates the application protection and does not constitute the complete
circuit design. Customers should verify actual device performance in their specific applications.
D2+
D2-
D1+
D1-
D0+
D0-
CK+
CK-
CE REMOTE
DDC_CLK
DDC_DAT
HOTPLUG_DET
5V
Americas: Tel [phone]
Fax [phone]
Europe: Tel [phone] Asia-Pacific: Tel [phone]
Fax [phone]
Fax [phone]
COPYRIGHT© 2011 • BOURNS, INC. • 8/11 • e/CPK1023 • “PortNote”is a registered service mark of Bourns, Inc.
“Bourns” and “Multifuse” are registered trademarks of Bourns, Inc. in the U.S. and other countries.
“HDMI” is a registered trademark of its owner.
Bourns® PortNote® solutions provide protection
recommendations for typical port threats.
For more information, go to:
www.bourns.com
or email: [e-mail]