CAY06-AS Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Sulfur-Resistant Thick Film Chip Arrays

*RoHS ^COMPLIANT
Features
■ RoHS compliant*
■ Convex termination style
■ 2 isolated elements in an 02 package width
■ Resistance tolerance: ±5 %
■ Resistance range: 10 ohms to 1 megohm
& zero-ohm jumper
■ Sulfur-resistant design
CAY06-AS Series - Sulfur-Resistant Thick Film Chip Arrays
General Characteristics
Characteristic
Number of Elements (Isolated)
Power Rating @ 70 °C per Resistor
Resistor Tolerance
Resistance Range (E24) plus Zero-ohm Jumper
Temperature Coefficient of Resistance (TCR)
Maximum Overload Voltage
Maximum Working Voltage
Operating Temperature Range
Storage Conditions
Derating Temperature
Packaging (Paper Tape)
Zero-ohm Jumper:
Current Rating
Maximum Resistance
CAY06-AS
2
31 mW
±5 %
10 ohms to 1 megohm
±200 ppm
25 V
12.5 V
-55 to +125 °C
+5 ~ +40 °C, 25~75 % RH, 1 year
+70 °C
10,000 pcs. per reel
1 A per element
100 milliohms
Environmental Characteristics
Specification
Test Method (JIS C 5201-1)
Short Time
Overload
Soldering Heat
Temperature
Cycling
Moisture Load
Life
Load Life
Sulfur Test
Rated voltage x 2.5, 5 seconds
+260 °C ±5 °C, 10 ±1 seconds
-55 °C (30 minutes) - normal (2~3 minutes)
+125 °C (30 minutes) - normal (2~3 minutes), 5 cycles
+40 °C, 90~95 % RH, 1000 hours,
1.5 hours ON, 0.5 hours OFF
+70 °C, 1000 hours,
1.5 hours ON, 0.5 hours OFF
3 ppm H2S, +50 °C, 90~95 % RH, 100 hours
NOTE: Zero-ohm jumper <100 milliohms.
Characteristics
±(2 % +0.1 ohm)
±(1 % +0.05 ohm)
±(1 % +0.05 ohm)
±(3 % +0.1 ohm)
±(3 % +0.1 ohm)
±(5 % +0.1 ohm)
Soldering Profile
275
<1> _{Maximum of 20 seconds between}
+255 °C and +260 °C
<1> _{255 °C}
225
175
150 °C
220 °C
190 °C
60 - 90
seconds
260 °C peak
Ramp Down
6 °C/second
125
60 - 120 seconds
10 seconds minimum
75
Ramp Up
3 °C/second maximum
25
0
50
100
150
200
250
300
Time (seconds)
How To Order
CA Y 06 - 103 J 2 AS
Chip Array
Type
• Y = Convex
Model
• 06 = 02 Package Width
Resistance Code
• First two digits are significant,
third digit represents number of
zeros to follow
(example: 103 = 10K ohms)
• 000 = Zero-ohm jumper
Resistance Tolerance
• J = ±5 %
Resistors
• 2 = 2 Resistors
Special Characteristics
• AS = Sulfur-resistant, Tin-plated terminations
(RoHS compliant)
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
Construction
PROTECTIVE
GLASS
OVERCOAT
HIGH PURITY
ALUMINA
SUBSTRATE
THICK FILM
RESISTIVE
ELEMENT
TERMINATION
* RoHS Directive 2002/95/EC Jan. 27, 2003 including
annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data
sheet can and do vary in different applications and
actual device performance may vary over time.
Users should verify actual device performance in their
specific applications.