7091 Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Network Interface Device

Features
I Accepts Bourns DSL POTS Splitters,
Station, & Coaxial Protectors
I Manufactured from high-impact resistant,
ultraviolet-desensitized, flame retardant,
UL Listed plastic
I Optional 2 - or 4 - post Sealed Switching
Jacks (RJ11)
I Subscriber lockable with Telco override
provision
I Provision for easy ground attachment
I ^U® L Listed per UL 497 (File: E53117)
7091 Series – Network Interface Device
Bourns Model 7091 NID provides a secure and weather resistant enclosure for single or multi-line residential or commercial
application. The 7091 is designed for termination and protection various combinations of subscriber services including
Twisted Pair, ADSL, VDSL and Coaxial lines.
How To Order
Model Number Designator
7091 - X X - X X X - XX
Number of Coax Lines
0 = None
3 = Includes One 1740 Coax Protector
4 = Includes Two 1740 Coax Protectors
Number of Twisted Pair Lines
1 = One line 3 = Three lines
2 = Two lines 4 = Four lines
Station Protector Options
D¹ = 455HS-MSP (2377-45-HS) Broadband Voice/Data Services
Z¹ = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL Systems
E = 155HS-MSP (2378-35-HS) Broadband Voice/Data
Y = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL Systems
B = 125EW (2374-01) Sealed Gas Tube (UL, Bellcore)
C = 125EW-R (2375-01) Sealed Gas Tube (REA, UL, CSA)
L = 356M (2377-01) Sealed 3-Pole Gas Tube (REA, UL, CSA)
M = J130S (2380-27-01) Solid State (UL)
T = Tii355M (2377-01)
O = No Station Protectors
*For DSL systems requiring capacitive balance ≤ 1pF
Special Options
B = Binding screws for Station Electronics
G = Security Screw in Telco Cover
H = Security Screw in Security Plate
I = IDC Type Expansion Bridge - 4 Jacks (85122-IDC)
T = Sealed Switching Jack 2-post (85122-T)
F = Sealed Switching Jack 4-post (85122-T4)
O = No Options
Coax Protector Type
2 = 1740-15 (150V±20% DC Breakdown @ 100V/Sec)
3 = 1740-23 (230V±20% DC Breakdown @ 100V/Sec)
4 = 1740-35 (350V±20% DC Breakdown @ 100V/Sec)
DSL Options* (2 DSL Lines Maximum)
A1 = (1) 3610A ADSL POTS Splitter
A2 = (2) 3610A ADSL POTS Splitters
V1 = (1) 3630A VDSL POTS Splitter
V2 = (2) 3630A VDSL POTS Splitters
To add lines, use upgrade kits:
• 85122 Standard Jack
(Not available with DSL Options)
Note 1 = Digi.Guard
REV. H
Specifications are subject to change without notice.
• 85122-RET-1 Sealed RJ11 - 1 Line
• 85122-RET-2 Sealed RJ11 - 2 Lines
Product Dimensions
High
228.6
(9.0)
Wide
215.9
(8.5)
Deep
63.5
(2.5)
DIMENSIONS:
MM
(INCHES)
*DSL Configuration Note:
The 3610A or 3630A can only be
ordered in 1 or 2 line configurations
and must be ordered with option D, Z,
E or Y Station Protectors. 7091 NIDs
ordered with a DSL option will include
Special Option F (sealed 4-post
switching jack).