7060 Datasheet, PDF (1/1 Pages) Bourns Electronic Solutions – Terminal Device

Features
I Weather resistant enclosure with hinged
cover
I Two pair, 24 gauge buried service wire
pigtails available
I May be mounted on trailer tongue with
steel beam clamp or structure with out-
side mounting brackets
I Four (4) terminal posts plus a ground
terminal with associated hardware
I Rubber grommet entry port
7060 Series – Terminal Device
Bourns 7060 Series Mobile Home Terminal Housing is designed to provide solutions for telephone service to semi-permanent
or mobile subscriber dwellings. The various configurations available will accommodate almost every temporary hook-up
condition.
The 7060 is a versatile, weather resistant enclosure, manufactured of high-impact resistant, ultraviolet-desensitized, flame
retardant plastic.
How To Order
7060-01 ....... Unit supplied with beam clamp and 10’ pigtail of two-pair 24 gauge
buried service wire
7060-02 ....... Unit supplied with beam clamp and 35’ pigtail of two-pair 24 gauge
buried service wire
7060-03 ....... Unit supplied with 10’ pigtail of two-pair 24 gauge buried service wire
– no beam clamp
7060-04 ....... Unit supplied with 35’ pigtail of two-pair 24 gauge buried service wire
– no beam clamp
7060-05 ....... Unit supplied as four post terminal box; no pigtail wire and no beam
clamp
For other options, please contact factory.
Product Dimensions
High
144.8
(5.7)
Wide
86.4
(3.4)
Deep
53.3
(2.1)
DIMENSIONS: ^MM
(INCHES)
REV. D
Specifications are subject to change without notice.
Asia-Pacific:
TEL +886- (0)2 25624117
FAX +886- (0)2 25624116
Europe:
TEL [phone]
FAX [phone]
North America:
TEL [phone]
FAX [phone]
bourns.com
COPYRIGHT© 2001, BOURNS, INC. LITHO IN U.S.A. IP 09/01 G0133