700 Datasheet, PDF (1/2 Pages) Microsemi Corporation – RECTIFIERS ASSEMBLIES THREE PHASE BRIDGES, 2.5 AMP, STANDARD AND FAST RECOVERY

*RoHS ^COMPLIANT
Features
■ Low noise termination for CMOS
■ Combined resistors and capacitors in SIP
package saves space
■ Reduced insertion time
■ Insulation resistance testing for reliability
■ Pin counts from 4 to 16 available
■ RoHS compliant*
This series is currently available but
not recommended for new designs.
For information on RC Terminators,
download Bourns’ RC Terminator Networks
Application Note.
700 Series - RC Terminator Networks
Electrical Characteristics - Resistors
Standard Resistance Range, ±5 % Tolerance............................. 22 ohms to 470K ohms
Operating Voltage................................................................................ 50 volts maximum
Electrical Characteristics - Capacitors
Capacitance Range ........................................................................... 39 pF to 47,000 pF
Capacitance Range ................................................................. 470 pF to 47,000 pF X7R
Capacitance Range ........................................................................ 39 pF to 470 pF NPO
Capacitance Tolerance ........................................................................................... ±20 %
Operating Temperature........................................................................... -30 °C to +85 °C
Voltage Rating ...................................................................................................... 50 volts
Physical Characteristics
Flammability ...................................................................................Conforms to UL94V-0
Lead Frame Material ..................................................................... Copper, solder coated
Body Material............................................................................................ Conformal coat
701
1
8
1
9
NO. OF
LINES
7
8
9
BOURNS P/N
4608H-701-RC/CCL
4609H-701-RC/CCL
4610H-701-RC/CCL
PACKAGE
High Profile
Conformal
SIP
Product Dimensions
A
MAXIMUM
8.5
(.335)
MAX.
PIN #1
REF.
MAX. 1.24
BOTH ENDS (.049)
.508
(.020
±
±
.050
.002)
TYP.
2.54 ± .07
(.100 ± .003** )
TYP. NON-ACCUM.
3.81
(.150)
MAX.
.254
(.010
±
±
.050
.002)
TYP.
3.0 ~ 3.8
(.118 ~ 0.15)
Pin
Count
4
5
6
7
8
9
10
11
12
13
14
15
16
A Maximum
mm (Inches)
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
38.04 (1.498)
40.59 (1.598)
Governing dimensions are metric. Dimensions in parentheses
are inches and are approximate.
**Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
Typical Part Marking
ELECTRICAL
CONFIGURATION
• 1 = Single Termination
• 2 = Double Termination
PIN ONE
INDICATOR
RESISTANCE
CODE***
71JF
CAPACITANCE
CODE***
MODEL
• 7 = 700 Series
***See Standard Marking, Values and Codes tables.
702
1
10
NO. OF
LINES
BOURNS P/N
8
4610H-702-RC/CCL
PACKAGE
High Profile
Conformal
SIP
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.