4600X Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Thick Film Conformal SIPs

*RoHS ^{VCEOARMVSAPIOILLINAASBNLTE}
Features
■ Lead free version available (see How to
Order “Termination” option)
■ RoHS compliant (lead free version)*
■ Low profile is compatible with DIPs
■ Wide assortment of pin packages
enhances design flexibility
■ Ammo-pak packaging available
■ Recommended for rosin flux and solvent
clean or no clean flux processes
■ Marking on contrasting background for
permanent identification
4600X Series - Thick Film Conformal SIPs
Product Characteristics
Resistance Range
......................10 ohms to 10 megohms
Maximum Operating Voltage..........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 MΩ................±100 ppm/°C
below 50 Ω ......................±250 ppm/°C
above 2.2 MΩ..................±250 ppm/°C
TCR Tracking .........................50 ppm/°C
maximum; equal values
Resistor Tolerance ................See circuits
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
.............................................200 VRMS
Operating Temperature
.................................-55 °C to +125 °C
Environmental Characteristics
TESTS PER MIL-STD-202.........∆R MAX.
Short Time Overload..................±0.25 %
Load Life ....................................±1.00 %
Moisture Resistance ..................±0.50 %
Resistance to Soldering Heat ....±0.25 %
Terminal Strength.......................±0.25 %
Thermal Shock...........................±0.25 %
Physical Characteristics
Flammability .........Conforms to UL94V-0
Body Material........................Epoxy resin
Standard Packaging
....................Bulk, Ammo-pak available
How To Order
46 06 X - 101 - 222 __ __
Model
(46 = Conformal SIP)
Number of Pins
Physical Configuration
(X = Thick Film Low Profile)
Electrical Configuration
• 101 = Bussed
• 102 = Isolated
• 104 = Dual Terminator
• AP1 = Bussed Ammo**
• AP2 = Isolated Ammo**
• AP4 = Dual Ammo**
Resistance Code
• First 2 digits are significant
• Third digit represents the number of
zeros to follow.
Resistance Tolerance
• Blank = ±2 % (see “Resistance Tolerance”
on next page for resistance range)
• F = ±1 % (100 ohms - 5 megohms)
Terminations
• All electrical configurations EXCEPT 104 & AP4:
LF = Sn/Ag/Cu-plated (lead free)
• ONLY electrical configurations 104 & AP4:
L = Sn/Ag/Cu-plated (lead free)
• Blank = Tin/Lead-plated
Consult factory for other available options.
**Available for packages with 10 pins or less.
Package Power Temp. Derating Curve
3.50
3.00
2.50
2.00
4614X
4612X
1.50
4610X
1.00 ^4608X
4606X
4604X
.50
0
25
70
125
AMBIENT TEMPERATURE ( °C )
Package Power Ratings (Watts)
Pkg.
Ambient
Ambient
Temperature
Temperature
70 °C Pkg.
70 °C
4604X
4605X
4606X
4607X
4608X
4609X
0.50 4610X 1.25
0.63 4611X 1.38
0.75 4612X 1.50
0.88 4613X 1.63
1.00 4614X 1.75
1.13
Product Dimensions
A
MAXIMUM
5.08
(.200)
MAX.
PIN #1
REF.
MAX. 1.24
BOTH ENDS (.049)
.508
(.020
±
±
.050
.002)
TYP.
2.54 ± .07
(.100 ± .003*)
TYP.
NON-ACCUM.
2.49
(.098)
MAX.
.254
(.010
±
±
.050
.002)
MAX.
3.43 +.38/ -.508
(.135 +.015/ -.020)
Pin
Count
4
5
6
7
8
9
10
11
12
13
14
A Maximum
mm (Inches)
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
Maximum package length is equal to 2.54mm (.100") times the
number of pins, less .005mm (.002").
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
Typical Part Marking
Represents total content. Layout may vary.
Part Number
Part Number
4606X-101-RC
6X-1-RC
4608X-102-RC
8X-2-RC
4610X-104-RC/RC 10X-4-RC/RC
RC = ohmic value, 3-digit resistance code.
NUMBER OF PINS
PIN ONE
INDICATOR
CIRCUIT
6X-2-222
YYWW
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.