4416P-2-103 Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – 4400P Series - Thick Film Surface Mounted Wide Body

*RoHS ^COMPLIANT
2–
C
4
4
1
4
7
1
1
2
1
6
1
P
–
Features
■ RoHS compliant*
■ Standard E.I.A. package compatible with
automatic placement equipment
■ Compliant leads to reduce solder joint
fatiguing
■ Tape and reel packaging standard
■ Standard electrical schematics: isolated,
bussed, dual terminator
■ Custom circuits are available
■ Now available with improved tolerance to
±0.5 %
4400P Series - Thick Film Surface Mounted Wide Body
Product Characteristics
Resistance Range
................... 10 ohms to 2.2 megohms
Maximum Operating Voltage ...........50 V
Temperature Coefficient of Resistance
50 Ω and above..............±100 ppm/°C
below 50 Ω .....................±250 ppm/°C
TCR Tracking.........................50 ppm/°C
maximum; equal values
Operating Temperature
................................-55 °C to +125 °C
Insulation Resistance
................ 10,000 megohms minimum
Dielectric Withstanding Voltage
...........................................200 VRMS
Lead Solderability .....Meet requirements
of MIL-STD-202 Method 208
Environmental Characteristics
TESTS PER MIL-STD-202 ...... ∆R MAX.
Short Time Overload..................±0.25 %
Load Life....................................±1.00 %
Moisture Resistance ..................±0.50 %
Resistance to Soldering Heat ....±0.25 %
Thermal Shock ..........................±0.25 %
Physical Characteristics
Flammability ........ Conforms to UL94V-0
Lead Frame Material
.........................Copper, solder coated
Body Material.................. Novolac epoxy
How To Order
44 20 P - 1 - 103 __ LF
Model
(44 = SMD SOL
Pkg.)
Number of Pins
Electrical Configuration
• 1 or 4 = Isolated*
• 2 = Bussed*
• 3 = Dual Terminator*
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
Resistance Tolerance
• Blank = ±2 % (see “Resistance Tolerance”
on next page for resistance range)
• F = ±1 % (100 ohms - 1 megohm)
• D = ±0.5 % (100 ohms - 1 megohm)
Terminations
• All electrical configurations EXCEPT T03:
LF = Tin-plated (RoHS compliant)
• ONLY electrical configuration T03:
L = Tin-plated (RoHS compliant)
*For tube packaging, use T01, T02, T03 or T04.
Consult factory for other available options.
Package Power Temp. Derating Curve
2.25
2.00
1.75
1.50
1.25
1.00
.75
.50
.25
0
4420P
4416P
25
70
125
AMBIENT TEMPERATURE ( °C )
Package Power Rating at 70 °C
4420P .....................................2.00 watts
4416P .....................................1.60 watts
Recommended Land Pattern
1.27 _TYP.
(.050)
.63 _TYP.
(.025)
2.0 _TYP.
(.079)
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
11.6
(.457)
SO-16L
.63
(.025)
SO-20L
12.07
(.475)
7.6
(.299)
NOTE: Land pattern dimensions are based on
design rules established by the Institute for Inter-
connecting and Packaging Electronic Circuits in
IPC-SM-782.
For Standard Values Used in
Capacitors, Inductors, and Resistors,
click here.
Product Dimensions
4420P
7.493 .076
(.295 .003)
10.34 .25
(.407 .010)
10.41 .05
(.410 .003)
.406 .025
(.016 .001)
12.95 .05
(.510 +.001/ -.002)
1.27
(.050
.076
.003*)
TYP.
.127 + .127/ - .000
(.005 + .005/ - .000)
2.65
(.104)
MAX.
.305 + .000/ - .076
(.012 + .000/ - .003)
8° MAX.
.94 + .33/ - .35
(.037 + .013/ - .014)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
Typical Part Marking
Represents total content. Layout may
vary.
PART
NUMBER
CIRCUIT
PIN ONE
INDICATOR
4416P-
2-472
CYYWW
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
COUNTRY OF MANUFACTURE
(C = COSTA RICA)
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.