4306M-101-222FLF Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Thick Film Molded SIPs

*RoHS ^{VCEOARMVSAPIOILLINAASBNLTE}
4
–
3
4
1
7
0
3
M
–
1
0
1
C1127
LF
Features
■ RoHS compliant* versions available (see
How to Order “Termination” option)
■ Medium profile offers increased power
handling
■ Compatible with automatic insertion
equipment
■ Superior package integrity
■ Now available with improved tolerance
to ±0.5 %
4300M Series - Thick Film Molded SIPs
Product Characteristics
Resistance Range
.................... 10 ohms to 10 megohms
Maximum Operating Voltage .........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 megohms.....±100 ppm/°C
below 50 Ω .....................±250 ppm/°C
above 2.2 megohms.......±250 ppm/°C
TCR Tracking.........................50 ppm/°C
maximum; equal values
Resistor Tolerance............... See circuits
Operating Temperature
................................-55 °C to +125 °C
Insulation Resistance
................ 10,000 megohms minimum
Dielectric Withstanding Voltage
...........................................200 VRMS
Lead Solderability .....Meet requirements
of MIL-STD-202 Method 208
Environmental Characteristics
TESTS PER MIL-STD-202 ...... ∆R MAX.
Short Time Overload..................±0.25 %
Load Life....................................±1.00 %
Moisture Resistance ..................±0.50 %
Resistance to Soldering Heat
...............................................±0.25 %
Terminal Strength ......................±0.25 %
Thermal Shock ..........................±0.25 %
Physical Characteristics
Flammability ........ Conforms to UL94V-0
Lead Frame Material
.........................Copper, solder coated
Body Material.................. Novolac epoxy
How To Order
43 06 M - 101 - 222 __ __
Model
(43 = Molded SIP)
Number of Pins
Physical Configuration
(M = Thick Film Medium
Profile)
Electrical Configuration
• 101 = Bussed
• 102 = Isolated
• 104 = Dual Terminator
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
Resistance Tolerance
• Blank = ±2 % (see “Resistance Tolerance”
on next page for resistance range)
• F = ±1 % (100 ohms - 1 megohm)
• D = ±0.5 % (100 ohms - 1 megohm)
Terminations
• All electrical configurations EXCEPT 104:
LF = Tin-plated (RoHS compliant version)
• ONLY electrical configuration 104:
L = Tin-plated (RoHS compliant version)
• Blank = Tin/Lead-plated
Consult factory for other available options.
Package Power Temp. Derating Curve
3.50
3.00
2.50
2.00
4310M
1.50
4308M
1.00 ^4306M
4304M
.50
0
25
70
125
AMBIENT TEMPERATURE ( °C )
Package Power Rating at 70 °C
4304M.....................................0.60 watts
4306M.....................................0.90 watts
4308M.....................................1.20 watts
4310M.....................................1.50 watts
Typical Part Marking
Represents total content. Layout may
vary.
PART CIRCUIT
NUMBER
PIN ONE
4310M-101 LF
-473
CYYWW
INDICATOR
RoHS COMPLIANCY
INDICATOR
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
COUNTRY OF MANUFACTURE
(C = COSTA RICA)
For Standard Values Used in
Capacitors, Inductors, and Resistors,
click here.
Product Dimensions
19.91
(.784)
MAX.
14.83
(.584)
MAX.
9.75
(.384)
MAX.
24.99 _MAX.
(.984)
PIN #1 REF.
6.35
(.250)
MAX.
.407 + .102/ - .000
(.016 + .004/ - 000)
2.54 .07
(.100 .003*)
TYP.
NON-ACCUM.
3.43 + .38/ - .25
(.135 + .015/ - .010)
1.02 .12
(.040 .005)
.483
(.020
..005002)TYP.
2.16 .10
(.085 .004)
1.02 .05
(.0425 .002)
.254 .050
(.010 .002)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.