4300H Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Thick Film Molded SIPs

*RoHS ^{VCEOARMVSAPIOILLINAASBNLTE}
Features
■ Lead free versions available (see How to
Order “Termination” option)
■ RoHS compliant (lead free version)*
■ High profile offers increased power
handling
■ Compatible with automatic insertion
equipment
■ Superior package integrity
■ Marking on contrasting background for
permanent identification
■ Now available with improved tolerance
to ±0.5 %
4300H Series - Thick Film Molded SIPs
Product Characteristics
Resistance Range
......................10 ohms to 10 megohms
Maximum Operating Voltage..........100 V
Temperature Coefficient of Resistance
50 ohms to 2.2 megohms ..±100 ppm/°C
below 50 ohms................±250 ppm/°C
above 2.2 megohms........±250 ppm/°C
TCR Tracking .........................50 ppm/°C
maximum; equal values
Resistor Tolerance ................See circuits
Operating Temperature
.................................-55 °C to +125 °C
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
.............................................200 VRMS
Lead Solderability
.....Meet requirements of MIL-STD-202
Method 208
Environmental Characteristics
TESTS PER MIL-STD-202.........∆R MAX.
Short Time Overload..................±0.25 %
Load Life ....................................±1.00 %
Moisture Resistance ..................±0.50 %
Resistance to Soldering Heat
................................................±0.25 %
Terminal Strength.......................±0.25 %
Thermal Shock...........................±0.25 %
Physical Characteristics
Flammability .........Conforms to UL94V-0
Lead Frame Material
..........................Copper, solder coated
Body Material ..................Novolac epoxy
How To Order
43 06 H - 101 - 222 __ __
Model
(43 = Molded SIP)
Number of Pins
Physical Config.
(H = Thick Film High Profile)
Electrical Configuration
• 101 = Bussed
• 102 = Isolated
• 104 = Dual Terminator
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
Resistance Tolerance
• Blank = ±2 % (see “Resistance Tolerance” on
next page for resistance range)
• F = ±1 % (100 ohms - 1 megohm)
• D = ±0.5 % (100 ohms - 1 megohm)
Terminations
• All electrical configurations EXCEPT 104:
LF = Tin-plated (lead free)
• ONLY electrical configuration 104:
L = Tin-plated (lead free)
• Blank = Tin/Lead-plated
Consult factory for other available options.
Package Power Temp. Derating Curve
3.50
3.00
2.50
4310H
2.00
4308H
1.50
4306H
1.00 _4304H
.50
0
25
70
125
AMBIENT TEMPERATURE ( °C )
Package Power Rating at 70 °C
4304H .....................................0.80 watts
4306H .....................................1.20 watts
4308H .....................................1.60 watts
4310H .....................................2.00 watts
Typical Part Marking
Represents total content. Layout may vary.
PART
NUMBER
PIN ONE
INDICATOR
4306H-101-
222
YYWW
CIRCUIT
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
Product Dimensions
19.91
(.784)
MAX.
14.83
(.584)
MAX.
9.75
(.384)
MAX.
24.99 _MAX.
(.984)
PIN #1 REF.
8.89
(.350)
MAX.
.407 + .102/ - .000
(.016 + .004/ - 000)
2.54 ± .07
(.100 ± .003*)
TYP.
NON-ACCUM.
3.43 + .38/ - .25
(.125 + .005/ - .010)
1.02 ± .12
(.040 ± .005)
.483
(.020
±
±
.050
.002)
TYP.
2.16 ± .10
(.085 ± .004)
1.02 ± .05
(.0425 ± .002)
.254 ± .050
(.010 ± .002)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.