4116R-R2R-503 Datasheet, PDF (1/1 Pages) Bourns Electronic Solutions – R/2R Ladder Networks

R/2R Ladder Networks
R/2R Ladder Networks are available in both DIP and SIP
(Molded or Conformal) configurations.
OUT
RT
16 15 14 13 12 11 10 9
16-PIN
8-BIT
DIP
RR
R RR
2R
RR
2R 2R 2R 2R 2R 2R 2R 2R
PIN 1
2
3
45
6
7
8
BIT 1
2
3
45
6
7
8
MSB
LSB
10-PIN
8-BIT
SIP
RR RRR RR
2R 2R 2R 2R 2R 2R 2R 2R 2R
PIN 1
2
3
4
56
7
8
9 10
BIT OUT
1
2
3
45
6
7
8 RT
MSB
LSB
The R/2R Ladder Network is commonly used for Digital to
Analog (D/A) conversions and Analog to Digital (A/D) conversion
by successive approximations. The bits of the ladder are the
points at which input signals are presented to the ladder and
the output terminal (OUT) is the point at which the output is
taken from the R/2R ladder. This terminal (OUT) is commonly
used to drive an operational amplifier. RT (the terminating resis-
tor) is always connected to ground.
Standard R/2R Ladder Networks have a resistance tolerance of
±2.0% (±1.0% available on all but low profile SIPs).
Standard R/2R Ladder Networks
Availability is as follows:
DIP/SMD
SIP-CONFORMAL
14 Pin - 7 Bit
16 Pin - 8 Bit
6 Pin - 4 Bit
7 Pin - 5 Bit
8 Pin - 6 Bit
9 Pin - 7 Bit
10 Pin - 8 Bit
11 Pin - 9 Bit
12 Pin -10 Bit
14 Pin -12 Bit
SIP MOLDED
6 Pin - 4 Bit
8 Pin - 6 Bit
10 Pin - 8 Bit
Resistor Power Ratings @ 70˚ C
Low Profile SIP & DIP ....................................................
Medium Profile SIP ........................................................
High Profile SIP ..............................................................
.125W
.170W
.200W
Model
(41 = Molded DIP)
(43 = Molded SIP)
(44 = Wide Body SMD)
(46 = Conformal SIP)
(48 = SMD)
Number of Pins
Physical Configuration
(R = Low Profile - Molded)
(X = Low Profile - Conformal)
(M = Medium Profile)
(H = High Profile)
(P = Medium Body SOIC)
How To Order R/2R Ladder Networks
41 16 R - R2R - 503
Resistance/Capacitance Code
(For value of R). 2R is double this value.
• First 2 digits are significant.
• Third digit represents the number
of zeros to follow.
Electrical Configuration
• R2R = R/2R Ladder Network
Specifications are subject to change without notice.
331