4100R Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Thick Film Molded DIPs

*RoHS ^{VCEOARMVSAPIOILLINAASBNLTE}
Features
■ Lead free versions available (see How to
Order “Termination” option)
■ RoHS compliant (lead free version)*
■ Compatible with automatic insertion
equipment
■ Superior package integrity
■ Marking on contrasting background for
permanent identification
■ Now available with improved tolerance
to ±0.5 %
4100R Series - Thick Film Molded DIPs
Product Characteristics
Resistance Range
......................10 ohms to 10 megohms
Maximum Operating Voltage..........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 MΩ................±100 ppm/°C
below 50 Ω ......................±250 ppm/°C
above 2.2 MΩ..................±250 ppm/°C
TCR Tracking .........................50 ppm/°C
maximum; equal values
Resistor Tolerance ................See circuits
Operating Temperature
.................................-55 °C to +125 °C
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
.............................................200 VRMS
Lead Solderability
.....Meet requirements of MIL-STD-202
Method 208
Environmental Characteristics
TESTS PER MIL-STD-202.........∆R MAX.
Short Time Overload..................±0.25 %
Load Life ....................................±1.00 %
Moisture Resistance ..................±0.50 %
Resistance to Soldering Heat
................................................±0.25 %
Terminal Strength.......................±0.25 %
Thermal Shock...........................±0.25 %
Physical Characteristics
Flammability .........Conforms to UL94V-0
Lead Frame Material
..........................Copper, solder coated
Body Material ..................Novolac epoxy
How To Order
41 14 R - 1 - 152 __ __
Model
(41 = Molded DIP)
Number of Pins
Physical Configuration
(R = Thick Film Low Profile)
Electrical Configuration
• 1 = Isolated
• 2 = Bussed
• 3 = Dual Terminator
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
Resistance Tolerance
• Blank = ±2 % (see “Resistance Tolerance” on
next page for resistance range)
• F = ±1 % (100 Ω - 1 MΩ)
• D = ±0.5 % (100 Ω - 1 MΩ)
Terminations
• LF = Tin-plated (lead free)
• Blank = Tin/Lead-plated
Consult factory for other available options.
Package Power Temp. Derating Curve
G CU
4.00
3.50
3.00 _4120R
4118R
2.50
4116R
2.00 ^4114R
4108R
1.50
1.00
.50
0
25
70
125
AMBIENT TEMPERATURE ( °C )
Package Power Rating at 70 °C
4108R......................................1.69 watts
4114R......................................2.00 watts
4116R......................................2.25 watts
4118R......................................2.50 watts
4120R......................................2.80 watts
Typical Part Marking
Represents total content. Layout may vary.
PART
NUMBER
PIN ONE
INDICATOR
4114R-1-
152
YYWW
CIRCUIT
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
Product Dimensions
PIN #1 REF.
11.81
(.465)
MAX.
27.05
(1.065)
MAX.
24.51
(.965)
MAX.
21.97
(.865)
MAX.
19.43
(.765)
MAX.
4.57 + .12/ - .28
(.180 + .005/ - .007)
.89 ± .25
(.035 ± .010)
TYP.
2.54 ± .25
(.100 ± .010*)
TYP.
NON-ACCUM.
2.03 ± .12
(.080 ± .005)
8.40
(.331)
MAX.
3.43 + .38/ - .25.
(135 + .015/ - .010)
1.65 + .12/ - .07
(.065 + .005/ - .003)
.438
(.019
±
±
..005002)TYP.
7.87 ± .25
(.310 ± .010)
TO OUTSIDE
WHEN PINS
ARE PARALLEL
6.71 ± .10
(.260 + .005)
(.260 - .000)
.254 ± .050
(.010 ± .002)
8.64 ± .50
(.340 ± .020)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.