361XA2 Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – ADSL2+ POTS Splitters

Features
■ Optimized for video over ADSL 2+ applications
■ Fast and easy DSL installation
■ Service interoperability and compatibility
■ Multiple “Home Run” connections
■ Meets requirements of ITU G.992.3/.5 and ANSI T1.413
■ ^U® L UL Listed per UL 1863
361xA2 Series ADSL2+ POTS Splitters
Bourns^® 3610A2, 3611A2 and 3612A2 models are high quality ADSL2+ POTS splitters designed to fit industry-standard Network
Interface Devices (NIDs). The new POTS splitters are optimized for high bit rate video over ADSL2+ applications. The products are
ANSI T1.413 compliant and meet the requirements of ITU G.992.3 and G.992.5. The 361xA2 POTS splitters accept the incoming
combined voice & data service, filter off the voice (POTS) channel and provide a connection point for the DSL data services
(ADSLx modem). In the event of power loss, the passive filter design allows for lifeline POTS service.
Bourns offers the ADSL2+ POTS splitter in three industry standard footprints (binding post, snap in and bus mount) which occupy only
a single space in the NID. Fitted with screw terminals and flying leads, the 361xA2 units can be installed in minutes. When combined
with a Bourns^® Multi-Stage (MSP^®) Station Protector, Sealed Switching Jack, and optional IDC expansion bridge, a complete ADSL2+
solutions package is provided for the customer premises.
Characteristics
DC Loop Current ..................................................................................................................0-100 mA
DC Loop Voltage ..................................................................................................................0 to -60 V
DC Resistance ......................................................................................................................≤25 ohms
Insertion Loss (Voice Band) ..................................................................................................<1.0 dB
Attenuation Distortion (Voice Band)......................................................................................< ±0.5 dB
Delay Distortion (Voice Band) ..............................................................................................<200 µs
Return Loss (Voice Band) ....................................................................................................8 dB ERL; 5 dB SRL-Low;
............................................................................................................................................5 dB SRL-High
Longitudinal Balance, Two Port Technique, POTS to Line Port (U-R); Line Port to POTS ......>58 dB @ 0.2 to 1 kHz
>53 dB @ 3 kHz
ADSL Band Attenuation........................................................................................................>65 dB @30 kHz – 300 kHz
>55 dB @301 kHz – 20 MHz
Tip to Ring Capacitance (POTS Port) ..................................................................................<115 nF
Imput Impedence (Loading the ADSL Band) ........................................................................<0.25 dB 30 kHz – 30 MHz
How To Order
Stud Mount ..........................................................................................................................Part #3610A2
Press Mount..........................................................................................................................Part #3611A2
Bus Mount ............................................................................................................................Part #3612A2
Band Attenuation
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Reliable Electronic Solutions
Asia-Pacific:
TEL [phone]
FAX [phone]
Europe:
TEL [phone]
FAX [phone]
The Americas:
TEL [phone]
FAX [phone]
www.bourns.com