3313J-1-201E Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – 3313 - 3 mm Trimpot® Trimming Potentiometer

***HRAoLHOSGCEOANMVFAPRILLEIAEABNMLTEODELS
Features
■ Surface Mount 3 mm Square
Single-Turn Cermet / Sealed
■ Compatible with surface mount
manufacturing processes
■ Rotor stop for “in-circuit” adjustment
■ 100 cycle rotational and seal life
■ Plastic housing for RF applications
■ Reverse pin layout option (Model 3313X)
■ RoHS compliant* - see processing
information on RoHS compliant surface
mount trimmers
■ For trimmer applications/processing
guidelines, click here
■ Halogen free models available**
3313 - 3 mm Trimpot^® Trimming Potentiometer
Electrical Characteristics
Standard Resistance Range
......................10 ohms to 2 megohms
(see standard resistance table)
Resistance Tolerance ........... ±20 % std.
End Resistance ..... 1 % or 3 ohms max.
(whichever is greater)
Contact Resistance Variation
.................................... 3 % or 3 ohms
Adjustability
Voltage Divider ........................ ±0.1 %
Rheostat.................................. ±0.2 %
Resolution ................................... Infinite
Insulation Resistance ............... 500 vdc.
100 megohms min.
Dielectric Strength
Sea Level................................ 500 vac
70,000 Feet ............................ 350 vac
Adjustment Angle .................. 220° nom.
Product Dimensions
3313J-1 ₂
3.2 +0.4/-0.2
(.126 +.016/-.008)
3.5 ± 0.2
(.138 ± .008)
31
ADJ. SLOT
0.52
(.020)
WIDE
X
1.93
(.076)
LONG
X
0.51
(.020)
DEEP
3313J-2 ₂
3.5 ± 0.2
(.138 ± .008)
3
1.68
(.066)
1.47 ± 0.15
(.058 ± .006)
3.2 +0.4/-0.2
(.126 +.016/-.008)
ADJ. CROSS SLOT
0.45
(.018)
WIDE
X
0.51
(.020)
DEEP
1 _1.42
(.056)
1.3 ± 0.1
(.051 ± .004)
Environmental Characteristics
Max. Soldering Exposure
............................... 260 °C/5 seconds
Power Rating (200 volts max.)
70 °C .................................. 0.125 watt
125 °C ....................................... 0 watt
Operating Temp. Range
............................... -55 °C to +125 °C
Temperature Coefficient
.................. ≤100 ohms ±150 ppm/°C;
................... >100 ohms ±100 ppm/°C
Seal Test ......................85 °C Fluorinert†
Humidity ...... MIL-STD 202, Method 106
(no vibration) TRS ±3 %;
IR 10 megohms
Vibration .....20 G TRS ±1 %; VRS ±1 %
Shock .......100 G TRS ±1 %; VRS ±1 %
Load Life...............................1000 hours
@ 70 °C Rated Power;TRS ± 3 %
Rotational Life ..... 100 cycles TRS ±3 %
Thermal Shock ..........................5 cycles
TRS ±2 %; VRS ±1 %
Physical Characteristics
1.5 ± 0.15
(.059 ± .006)
2 PLCS
2.3 ± 0.2
(.091 ± .008)
0.66 ± 0.1 _{2 PLCS}
(.026 ± .004)
2.2 ± 0.2
(.087 ± .008)
0.15
(.006)
RECOMMENDED LAND PATTERN
1.6
(.063)
1.6
(.063)
1.60
(.063) _1.1
(.043)
0.6
(.024)
4.5
(.177)
0.65
(.026)
1.1
(.043)
0.6
(.024)
Mechanical Angle ................. 250 ° nom.
Torque...............................50 g-cm max.
Stop Strength ..................200 g-cm min.
Pushover Strength (“S” Style only)
........ 1.6 Kilograms (3.5 lbs) minimum
Flammability ..........................U.L. 94V-0
Weight ......................... Approx. 0.01 oz.
Marking........................ Resistance code
and date code
Wiper ............... 50 % (Actual TR) ±10 %
Standard Packaging
J, X Styles .............. 1000 pcs./7 ” reel
S Style...................... 200 pcs./7 ” reel
Adjustment Tool..............................H-91
3313X-1 (Reverse Pin Layout)
2
13
3313X-2 (Reverse Pin Layout)
2
†“Fluorinert” is a registered trademark of 3M Co.
Specifications are subject to change without notice.
13
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may
vary over time.
Users should verify actual device performance in their specific applications.
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Halogen free product is identified by a black housing color. Bourns follows the prevailing definition of “halogen free” in the industry.
Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is
900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
3313S-1
3.02
(.119)
3
Position Rotor As Shown
Within ±11° Of Centerline
Of Terminal 2
3.61 ± .20
(.142 ± .008)
ADJ. SLOT
.52 ± 0.03 _WIDE
(.020 ± .001)
X ^{1.93 ± 0.03} LONG
(.076 ± .001)
X ^{.51 ± 0.06} _DEEP
(.020 ± .002)
21
3313S-2
3.02
(.119)
3
2.77
(.109)
Position Rotor As Shown
Within ±11° Of Centerline
Of Terminal 2
3.61
(.142)
ADJ. SLOT
.45 ± 0.03 _WIDE
(.018 ± .001)
X ^{1.93 ± 0.03} LONG
(.076 ± .001)
X ^{.51 ± 0.06} _DEEP
(.020 ± .002)
21
3.71
(.146)
5.35
(.211)
0.15 ± 0.03
(.006 ± .001)
0.71
(.028
±
±
0.0.2008)TYP
1.30
(.051)
1.15
(.045)
TYP
2.39
(.094)
RECOMMENDED LAND PATTERN
1.57
(.062) ^{3 PLCS}
1.57
(.062)
2.62
(.103)
2.39
(.094)
1.12 _{2 PLCS}
(.044)
2 ^WIPER
CCW ₁
CLOCKWISE
3 CW
DIMENSIONS:
TOLERANCES: ±
0.25
(.010)
MM
(INCHES)
EXCEPT WHERE NOTED