2054-23 Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Surface Mount Gas Discharge Tube Surge Protector

*RoHS ^COMPLIANT
Features
■ Surface mount
■ Compact mini-size - 5 x 7.2 mm
■ Economical
■ Low capacitance and insertion loss
■ UL Recognized
■ RoHS compliant*
2054 Series Surface Mount Gas Discharge Tube Surge Protector
Bourns offers a low-cost, 3-electrode surface mount GDT surge protection device. The 2054 Series is ideal for broadband
protection due to its ultra-low capacitance. The 2054 Series offers superior protection characteristics suitable for telecommunications,
commercial and industrial applications.
Characteristics
Test Methods per ITU-T (CCITT) K.12, IEEE C62.31
Characteristic
2054-23
2054-30
DC Sparkover ±20 % @ 100 V/s
Impulse Sparkover⁽¹⁾
100 V/µs
1000 V/µs
230 V
550 V
650 V
300 V
700 V
800 V
(1) _{Impulse Sparkover voltage is defined as typical values of distribution.}
Model No.
2054-35
350 V
700 V
800 V
2054-42
420 V
800 V
900 V
2054-47
470 V
800 V
900 V
Insulation Resistance (IR) .......................................100 V ..................................................................... > 109 Ω
Capacitance.............................................................1 MHz..................................................................... 2.0 pF maximum
DC Holdover Voltage ⁽²⁾............................................>135 V (80 V for 2054-23)...................................... < 150 ms
Impulse Discharge Current......................................5000 A, 8/20 µs ..................................................... 5 operations
200 A, 10/1000 µs .................................................. 100 operations
Alternating Discharge Current ................................. 5 Arms, 1 sec., 50 Hz ............................................ 1 operation minimum
Operating Temperature............................................................................................................................ -30 to +85 ºC
Climatic Category (IEC 60068-1)............................................................................................................. 40/90/21
Notes:
• UL Recognized component, UL File E153537.
• Line to Line voltage is approximately 1.8 to 2 times the stated Line to Ground voltage.
• The rated discharge current is the total current equally divided between each line to ground.
• Surface Mount (SM) parts may show a temporary increase in DCBD after the solder reflow process. Most devices will recover
within 24 hours time. It should be noted that there is no quality defect nor change in protection levels during the temporary change
in DCBD.
• At delivery AQL 0.65 AQL Level II, DIN ISO 2859
• Bourns recommends reflowing surface mount devices per IPC/JEDEC J-STD-020 rev D.
(2) _{Network applied.}
Asia-Pacific: Tel: [phone] • Fax: [phone]
EMEA: Tel: [phone] • Fax: [phone]
The Americas: Tel: [phone] • Fax: [phone]
www.bourns.com
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.