2052-23 Datasheet, PDF (1/2 Pages) Bourns Electronic Solutions – Light Duty 3-Electrode Symmetrical Gas Discharge Tube

*RoHS ^COMPLIANT
Features
■ Size: 5 mm diameter, 7.2 mm length
■ Surface mount design
■ Symmetrical breakdown voltage (L-L, L-G)
■ Low capacitance and insertion loss
■
UL Recognized
■ RoHS compliant*
Applications
■ Telecommunications equipment
■ Industrial equipment/electronics
■ Consumer electronics
2052 Series Light Duty 3-Electrode Symmetrical Gas Discharge Tube
Characteristics
Test Methods per ITU-T K.12 and IEC 61643-311.
Characteristic
2052-23 2052-25 2052-35
DC Sparkover ±20 % @ 100 V/s
(L-L, L-G)
230 V
250 V
350 V
Impulse Sparkover (L-L, L-G) ⁽¹⁾
100 V/µs
1000 V/µs
< 600 V < 600 V < 650 V
< 700 V < 700 V < 750 V
(1) _{Impulse Sparkover voltage is defined as typical values of distribution.}
Model No.
2052-40 2052-42
400 V
420 V
< 700 V < 700 V
< 800 V < 800 V
2052-47
470 V
< 800 V
< 900 V
2052-60 2052-80
600 V
800 V
< 900 V < 1150 V
< 1000 V < 1400 V
Insulation Resistance (IR) ⁽²⁾...................................100/250 Vdc .......................................................... > 1 GΩ
Glow Voltage ...........................................................10 mA..................................................................... ~ 70 V
Arc Voltage ..............................................................1 A .......................................................................... ~ 10 V
Glow-Arc Transition Current .................................................................................................................... < 1 A
Maximum Capacitance ............................................1 MHz..................................................................... < 2 pF
Maximum Impulse Discharge Current ..................... 10,000 A, 8/20 µs .................................................. 1 operation
5,000 A, 8/20 µs ..................................................... 10 operations
Nominal Alternating Discharge Current ................... 5 A, 50 Hz, 1 sec. .................................................. 1 operation
20 A, 9 cycles ......................................................... 1 operation
Impulse Life ............................................................. 200 A, 10/1000 µs .................................................. 150 operations
DC Holdover Voltage ⁽³⁾...........................................>135 V.................................................................... < 150 ms
Operating Temperature............................................................................................................................ -30 to +85 ºC
Storage Temperature............................................................................................................................... -40 to +115 °C
Climatic Category (IEC 60068-1)............................................................................................................. 40/90/21
Notes:
• UL Recognized component, UL File E153537.
• At delivery AQL 0.65 AQL Level II, DIN ISO 2859.
• The rated discharge current is the total current equally divided between each line to ground (ELTG).
• Bourns recommends reflowing surface mount devices per IPC/JEDEC J-STD-020 rev D.
(2) _{DC Sparkover Voltage}
145-400 V
420–800 V
IR Measuring Voltage
100 V
250 V
(3) _{Network Applied.}
Asia-Pacific: Tel: [phone] • Fax: [phone]
EMEA: Tel: [phone] • Fax: [phone]
The Americas: Tel: [phone] • Fax: [phone]
www.bourns.com
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.