HBA2 Datasheet, PDF (3/7 Pages) Bothhand USA, LP. – Isolated DC-DC Converters

Bothhand USA
Isolated DC-DC Converters
HBA2 Series -- 2Watt
Voltage balance
Minimum load
Line regulation
Dual output
For Vin change of 1%
Load Regulation
10% load to full load
Ripple and Noise (20MHz Bandwidth)
Maximum capacitive load
Output short circuit protection
General Specifications
Efficiency
Isolation voltage
Isolation resistance
Isolation capacitance
Switching frequency
Reliability, calculated MTBF
Physical Specifications
Case material
Potting material
Dimensions
Weight
Nominal input and full load
Input to output
500VDC
±1% max.
0A
±1.5% max.
10% max.
15% max. (5Vout models)
20% max. (3.3Vout models)
200mVp-p max.
See table
1 second
See table
6400VDC (1 second)
10GΩ min.
10pF max.
80kHz max.
2×10 ⁶ Hrs
Plastic (UL94 V-0)
Epoxy (UL94 V-0)
0.77 × 0.50 × 0.39 Inch
(19.5 ×12.5 × 9.8 mm)
4.3g (0.15oz) typ.
Note
1. Io below this value will not damage these converters, however, they may not meet all listed specifications.
2. Typical value, tested at nominal input and full load.
3. For each output.
[e-mail]
www.bothhandusa.com
Rev:20130522A
Page 3 of 4