FS2022 Datasheet, PDF (1/1 Pages) Bothhand USA, LP. – 10 BASE-T ETHERNET SMD FILTER

10 BASE-T ETHERNET SMD FILTER
P/N:FS2022:APPLY TO GENERIC IC
A. GENERAL SPECIFICATIONS:
1. DESIGNED FOR 10 BASE-T APPLICATION.
2. FULLY COMTATIBLE WITH IEEE 802.3 STANDARD.
3. 16-PIN SMD LOW PROFILE PACKAGE .
4. OPERATION TEMP: 0°C TO 70°C.
5. STORAGE TEMP RANG: -25°C TO +125°C.
B. ELECTRICAL SPECIFICATIONS @ 25°C:
1. TURN RATIO:
TX=1CT:1CT ,RX=1CT:1CT
2. HI-POT:
1800 Vrms
3. CUT-OFF FREQ:
17 MHz +/- 1.5MHz
4. INSERTION LOSS (1-10 MHz): -1.0dB MAX (TX & RX)
5. ATTENUATION 20MHz 25MHz 30MHz
TRANSMITTER -6.8 -27 -32 (dB MIN)
RECEIVER -4.2 -20 -32
6. RETURN LOSS:
FREQUENCY TX RX
1-12MHz -13.5 -13.5 (dB MIN) D. MARKING:
7. CROSSTALK ATTEN (1-10 MHz): -30 dB(MIN)
C. DIMENSIONS & SCHEMATIC: (unit mm)
Prepared :Pi JunMin
Drawing no.:Filter
Approved: Xu Wenbing
REV.:1
Page : 1/1
Date : 2000/5/2