OPI2000M Datasheet, PDF (1/5 Pages) Bedford Opto Technology Ltd. – High Speed Opto Isolator Surface Mount ATEX and IECEx certified

This
component _Pb
is RoHS
compliant
OPI 2000M
High Speed Opto Isolator
Surface Mount
ATEX and IECEx certified
The OPI 2000M High Speed Optically Coupled Isolator consists of a High Speed Infrared emitter
coupled to a silicon photo I.C. The unit is designed for applications requiring high voltage isolation
between input & output.
• Surface Mount in Tape & Reel
High Speed 2Mb/sec.
• 10KV isolation
Low Propagation Delay
CERTIFICATE ATEX BAS01ATEX1285U/3
Confirmed conform to:-
EN60079-0:2006 EN61241-0:2006
EN60079-11:2007 EN61241-11:2006
EN60079-26:2004
Conditions of use apply:- See ‘Schedule
of limitations’ on certificate
CERTIFICATE IECEx BAS 06.0021U/1
Designed and manufactured to:-
IEC 60079-0: 2000 Edition 3.1
IEC 60079-11 :1999 Edition 4
IEC 60097-26 :2004 Edition 1
Conditions of use apply:- See ‘Schedule of
limitations’ on certificate.
MECHANICAL DATA
14.45-0.0+0.2
6.65
SURFACE MOUNT LEAD FORM
9.25
CONDITIONS OF USE APPLY
1.75
0.4
6.5
+0.2
0
Emitter 0.4x0.45
10.50-0.0+0.2
An
PIN OUT
K
(TOP VIEW)
SENSOR 0.5 SQ
0.5
1.91
GRD
Vout
Vcc
2.54
1.91
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
Tel: [phone] Fax: [phone]
Website: bot.co.uk E-mail: [e-mail]
1/5