HS-6253_1 Datasheet, PDF (17/80 Pages) BOSER Technology Co., Ltd – VIA C3 800MHz Embedded CPU Industrial Single Board Computer

JP4(1-4): DiskOnChip Address Select
Address
* D000
D800
PINS 1-2
Short
Open
PINS 3-4
Short
Short
3.7.1 Installing DiskOnChip Modules
When installing a DiskOnChip module onto your board, please take
note of the following:
1. Orient yourself properly with the location of the DiskOnChip
socket. Try to locate the pin 1 location on your socket. Pin
numbers are usually printed on either the component side or the
solder side of your board.
2. Locate the Pin 1 location on your DiskOnChip module. More
often than not, Pin 1 can be found on the lower right corner of
the chip. Please refer to the diagram for the exact location.
3. Once you have figured out where the pin 1 locations are on both
chip and socket, align the module’s pins on an upright angle
against the socket. Using both thumbs, gently press the module
into the socket until all the pins are secured to their
designations.
DiskOnChip
Pin 1
Location
4. The installation is now complete and your module is now ready
for use.
NOTE: If you encounter difficulty installing your DiskOnChip module,
please consult a qualified technician or engineer to perform the
installation.
11