MPI-P10H Datasheet, PDF (1/1 Pages) BOSER Technology Co., Ltd – 100W AC-DC Power Supply

MPI-P10H
100W AC-DC Power Supply
Industrial Power Supply
MPI-806H
80W AC-DC ATX Power Supply
AC-DC
CN2
11
CN4CN3
1
17.05
CN
1
TRANSFORMER
N CN1
L
CN
1
12
12.8
11.53
4.0
0.635
0.635
4.0
10.0
3.05
Use #6-32 screw protrusion
limit 3.5mm x 4
Use#6-32 screw
Protrusion limit 2.5mmx4
6.5 _1.55
0.25
Specifications
Specifications
Output
Voltage
+5V
+12V
-12V
+3.3V
+5Vsb
Mini. Output
Current
Rated Output
Current
Max. Output
Current (Note 1)
Line
Regulation
1A
5.5A
8A
1%
0.1A
2.5A
5A
1%
0A
0.5A
----
1%
0A
0A
4A
0.75A
6A
----
1%
1%
Load
Regulation
2%
4%
5%
4%
4%
Ripple & Noise
p-p (Note 2)
50mV
120mV 120mV
50mV
120mV
Initial Setting 5.08V to 11.4V to -11.4V to 3.10V to 4.80V to
Accuracy (Note 3) 5.13V
12.6V
-12.6V
3.50V
5.20V
Total Output Power
100W continuously maximum convection cooling, peak 120W with
forced air (Note 4)
Note:
1) The maximum total combined output power on the +3.3V and +5V rails is 50W
2) Measured by a 20MHz bandwidth limited oscilloscope and the each output is connected
with a 10uF Electrolytic Capacitor and a 0.1uF Ceramic Capacitor
3) The +5V output is set between 5.08V to 5.13V by variable resistor and all output at
60% rated load and the other outputs are checked to be within the accuracy range
4) Total maximum output power 100W at 25^oC and 80W at 50^oC convection cooling.
Maximum 100W and peak 120W with 10.2CFM forced air-cooling
Dimensions
17.05 x 8.3 x 4.1 cm, Tolerance +/-0.4mm
Output
Voltage
+5V
+12V
-12V
+3.3V
+5Vsb
Min. Output
Current
Rated Output
Current
Max. Output
Current (Note 1)
Line
Regulation
0.5A
5A
8A
+/-1%
0A
1.5A
3A
+/-1%
0A
0.5A
----
+/-1%
0A
4A
6A
+/-1%
0A
0.75A
----
+/-1%
Load
Regulation
2%
4%
5%
4%
4%
Ripple & Noise
p-p (Note 2)
50mV
120mV 120mV
50mV
120mV
Initial Setting 5.08V to 11.4V to -11.4V to 3.10V to 4.80V to
Accuracy (Note 3) 5.13V
12.6V
-12.6V
3.50V
5.20V
Total Output Power
80W at 50^oC environment temperature (Note 4)
Note:
1) The maximum total combined output power on the +3.3V and +5V rails is 40W
2) Measured by a 20MHz bandwidth limited oscilloscope and the each output is connected
with a 10uF Electrolytic Capacitor and a 0.1uF Ceramic Capacitor
3) The +5V output is set between 5.08V to 5.13V by variable resistor and all output at
60% rated load and the other outputs are checked to be within the accuracy range
4) Total maximum load cannot exceed 80W with 8.6CFM forced air-cooling and 60W
convection cooling
Dimensions
12.8 x 8.1 x 4.0 cm, Tolerance +/-0.4mm