MPI-8080 Datasheet, PDF (1/1 Pages) BOSER Technology Co., Ltd – 80W AC-DC Open Frame Power Supply Output 100W with Fan Required

MPI-8080
80W AC-DC Open Frame Power Supply
Output 100W with Fan Required
E
N
L
TB1
TRANSFORMER
15.24
14.44
1
12
TB2
0.4
6.85
1.4
Use #6-32 screw
Protrusion limits 2.5mm
x4
Measuring the screw
protrusion first:
screw
System
chassis
Features
*Input Voltage: 85~264VAC
*Input Frequency: 47~63Hz
*Input Current: 3A at 115VAC or 1.5A at 230VAC max.
capacitors
*Inrush Current: Does not exceed 30A at 115VAC input or
60A at 230VAC input, cold start at 25^oC
*Load Regulation: With +5V output set between 4.95~5.05V
and all output at 60% rated load, and all other outputs in the
accuracy range, max. load can not > 80W convection cooling
and > 100W forced air cooling
*Ripple And Noise: Peak to peak ripple and noise for each
output is < 1% of each output voltage at rated load
*Line Regulation: < +/-1% at rated load with +/-10% change
in input voltage
*Load Regulation: < +/-1% for +5V, < +/-5% for other
outputs with +/-40% change in measured output loading from
60% rated load and other outputs at 60% rated laod
*Hold Up Time: > 16ms at 115VAC input and rated load
*Efficiency: > 70% at nominal line and rated load
*Altitude: 10,000 feet
*Protection:
Short Circuit: Hiccup mode against short circuit or over load
conditions auto recovery to normal after wrong conditions are
removed
Output: Built-in crowbar circuit shuts down outputs to avoid
damage. Trip point of over voltage protection is between
5.7~7.0V AC line ON/OFF restarts and recovers the unit from
over voltage protection
*Temperature: 0~+50^oC, requires forces air of 30CFM for
outputs > 80W (operating); -20~+70^oC (storage)
*Humidity: 5~95%; non-condensing at 40^oC (operating)
*Dimensions: 15.24 x 8.38 x 3.8 cm within +/-0.4mm
tolerance
*MTBF: 283,179 hrs.
Safety Standards
*Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950
*EMI: FCC class B / EN55022 B
*EMS: Level 3 of IEC-801, 802, 803, 804
PIN
1~3
4~7
8~9
10
11
12
Output
+5V
GND
+12V
-12V
-5V
N/C
PIN
Input
1
AC Line-1
2
AC Line-2
3
GND
Output Min.
Voltage Load
+5V 1A
+12V 0A
-12V 0A
-5V 0A
Rated
Load
6A
3.5A
0.5A
0.5A
Max.
Load
10A
6A
1A
1A
Tolerance
+/-0.05V
+/-0.75V
+/-0.75V
+/-0.25V
www.boser.com.tw