BPW-8071 Datasheet, PDF (1/1 Pages) BOSER Technology Co., Ltd – 70W DC-DC Open Frame Power Supply Input Range: 10~30VDC Output 70W with 22FCM Fan Required

BPW-8071
70W DC-DC Open Frame Power Supply
Input Range: 10~30VDC
Output 70W with 22FCM Fan Required
12.7
0.5
11.56
TB2
E
0V
+15V
TRANSFORMER
TB2
1
TB3
Features
*Input Voltage: 10~30VDC with normal line at +24VDC
*Input Frequency: 47~63Hz
*Input Current: 13A at 10VDC max.
*Inrush Current: < 15A at 10VDC input from cold start
excluding EMI capactiors
*Load Range: With all other outputs within their specified
voltage accuracy ranges and 60% rated load conditions, the
+5V output is between 5~5.1V. It could last 10 sec. at peak
load and 25^oC
*Ripple and Noise: Peak to peak ripple and noise for +5V is
< 50mV, and < 100mV for the other
*Line Regulation: < +/-2% for each output at rated load and
< +/-10% +12V and +24V input variables
*Load Regulation: < +/-1% for +5V, < +/-5% for +12V and
-12V
*Efficiency: > 70% at nominal line and rated load
*Altitude: > 10,000 feet
*Protection: Built-in over voltage protection circuit. Trip point
of crowbar circuit is between 5.7~7V hiccup mode against
short circuit or over load conditions auto recovery when fault
conditions are removed O.C.P. of +5V is 20A max.
*Temperature: 0~+50^oC (operating); -40~+85^oC (storage)
*Connectors:
DC Input: Terminal blocks
DC Output: Molex 5273-04A or equivalent device
For Fan Use Only: Molex 5045-02A or equivalent device
*Dimensions: 12.7 x 7.62 x 3.86 cm at tolerance +/-0.4mm
Safety Standards
*Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950
*EMI: FCC class B / EN55022 B
*EMS: Level 3 of IEC-802, 803, 804
PIN
1~3
4~6
7
8
Output
+5V
GND
+12V
-12V
Output Min.
Voltage Load
+5V 0A
+12V 0A
-12V 0A
Rated
Load
10A
1.5A
0.3A
Max.
Load
14A
3A
----
Voltage
Accuracy
5~5.1V
11.3~12V
-10.8~-12V
www.boser.com.tw