APDS-9008 Datasheet, PDF (8/12 Pages) AVAGO TECHNOLOGIES LIMITED – Miniature Surface-Mount Ambient Light Photo Sensor

Moisture Proof Packaging
UNITS IN A SEALED
MOISTURE-PROOF
PACKAGE
PACKAGE IS OPENED
(UNSEALED)
PARTS ARE NOT
NO
RECOMMENDED TO BE
USED
NO
ENVIRONMENT LESS
THAN 30 °C AND
LESS THAN 60%RH
YES
PACKAGE IS OPENED
LESS THAN 168
HOURS
NO
PACKAGE IS OPENED
LESS THAN 15 DAYS
YES
NO BAKING IS
NECESSARY
YES
PERFORM
RECOMMENDED BAKING
CONDITIONS
All APDS-9008 options are shipped in moisture proof
package. Once opened, moisture absorption begins. This
part is compliant to JEDEC Level 3.
Baking Conditions:
Package
Temperature
In Reel
60°C
In Bulk
100°C
* Baking should only be done once.
Time
48 hours
6 hours
8
Recommended Storage Conditions:
Storage Temperature
Relative Humidity
100°C to 300°C
below 60% RH
Time from unsealing to soldering:
After removal from the bag, the parts should be soldered
within 168 hours if stored at the recommended storage
conditions. If times longer than 168 hours are needed, the
parts must be stored in a dry box.