APDS-9306-065 Datasheet, PDF (20/21 Pages) Broadcom Corporation. – Miniature Surface-Mount Digital Ambient Light Sensor

Moisture Proof Packaging Chart
All APDS-9306/APDS-9306-065 options are shipped in moisture proof package. Once opened, moisture absorption
begins.
This part is compliant to JEDEC Level 3.
BAKING CONDITIONS CHART
UNITS IN A SEALED
MOISTURE-PROOF PACKAGE
PACKAGE IS OPENED
(UNSEALED)
NO BAKING IS
YES
NECESSARY
ENVIRONMENT
LESS THAN 30° C
AND LESS THAN
60% RH
YES
PACKAGE IS
OPENED LESS
THAN 168 HOURS
NO
PERFORM RECOMMENDED
NO
BAKING CONDITIONS
Recommended Storage Conditions
Storage Temperature
Relative Humidity
10°C to 30°C
Below 60% RH
Time from Unsealing to Soldering
After removal from the bag, the parts should be soldered
within seven days if stored at the recommended storage
conditions. When the Moisture Barrier Bag (MBB) is
opened and the parts are exposed to the recommended
storage conditions more than seven days, the parts must
be baked before reflow to prevent damage to the parts.
Baking conditions
If the parts are not stored per the recommended storage
conditions they must be baked before reflow to prevent
damage to the parts.
Package
Temp.
In Reels
60°C
In Bulk
100°C
Note: Baking should only be done once.
Time
48 hours
4 hours
20