BCM5364 Datasheet, PDF (2/2 Pages) Broadcom Corporation. – SENTRY 5 PRODUCT LINE: BCM5364/BCM5364P SECURED SWITCH PROCESSORS

OVERVIEW
SDRAM I/F
GPIO
USB
UART
On-Chip Bus
8-KB I-CACHE
4-KB D-CACHE
FLASH
I/F
PCI 2.2
Host
(32-Bit/33-MHz)
200-MHz
MIPS32
Core
MMU
On-Chip Bus
Ethernet MAC/MII
Symmetric Key
Engine
75 Mbps
Ethernet
Switch
Controller
4-Port 10/100
LAN PHY
10/100
WAN PHY
128-KB
Packet Buffer
Note: PCI Interface Supported in 5365P Only
Broadcom's BCM5364 and BCM5364P, two System-On-Chips, are the
most highly integrated access switch processor there are. The
BCM5364/BCM5364P also features an on-chip, five-port 10/100
Ethernet switch with management features. This switch processor also
offers extensive processor and interface integration featuring an
integrated 200-MHz MIPS32™ core, UART, flash and SDRAM/
DDRAM interfaces. The BCM5364P also supports a PCI interface. Both
the devices support IPSec encryption and authentication in a single pass.
The integrated 200-MHz MIPS32™ core of the BCM5364/BCM5364P
has a 2-way set-associative 8-KB instruction cache and a 4-KB data
cache The CPU includes the MMU, which enables support for various
RTOS.
The BCM5364/BCM5364P also supports interfaces that enable system-
level cost savings, a better form factor, and lower power dissipation. The
BCM5364/BCM5364P supports up to 512 MB of SDRAM/DDRAM
and 64 MB of flash memory.
The BCM5364P also supports the PCI version 2.2, 32-bit/33-MHz host
interface, allowing enumeration of four external PCI peripherals as a
way to extend system functionality. The UART enables a glueless
interface to serial devices such as modems.
Broadcom provides its proven API and drivers for integration with third-
party application software. Broadcom also offers application software to
build complete system applications. Application software support
includes functions such as firewall (dynamic firewall, DMZ hosting,
filtering-IP/TCP, NAT/PAT), VPN (IKE engines, IPSec drivers and
API, PPTP-passthrough, PPPoE client-PAP and CHAP authentication),
QoS/CoS/ToS (static and dynamic Ethernet routing, VLAN tagging),
and many other features.
A single BCM5364/BCM5364P based platform is easy to reuse for
other types of access to market segment equipment ranging in throughput
performance from T1/E1 to 100 Mbps. This equipment includes wireless
and wired home/residential and SOHO firewall and VPN appliances,
wireless access points, and many types of customer premises equipment
(CPE) devices.
Broadcom^®, the pulse logo, and Connecting everything^® are trademarks of Broadcom Corporation and/
or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the
property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2004 by BROADCOM CORPORATION. All rights reserved.
5364_5364P-PB00-R 04/01/04
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.broadcom.com