DEMO-MGA-12516B Datasheet, PDF (12/16 Pages) Broadcom Corporation. – Low Noise, High Linearity Match Pair Low Noise Amplifier

Typical Noise Parameters, Vdd=5V, Idd=50mA
Freq
Fmin
*_opt
*_opt
GHz
dB
Mag.
Ang.
R_n/50
0.5
0.32
0.35
-23.36
0.049
0.7
0.32
0.30
-5.38
0.047
0.9
0.33
0.25
1.05
0.061
1.7
0.40
0.26
24.96
0.053
1.85
0.42
0.25
36.84
0.047
2.0
0.45
0.21
95.96
0.039
2.4
0.52
0.17
113.99 0.040
2.6
0.56
0.23
134.72 0.034
3.5
0.69
0.26
172.14 0.035
Notes:
1. The Fmin values are based on noise figure measurements at 100
different impedances using Focus source pull test system. From
these measurements a true Fmin is calculated.
2. Scattering and noise parameters are measured on 0.010 inch thick
ROGER 4350. The input reference plane is at the end of the RFin pin
and the output reference plane is at the end of the RFout pin as
shown in Figure 32.
3. S2P file with scattering and noise parameters for biasing 3V 50mA,
3.5V 50mA, 4V 50mA, 4.5V 50mA, 5V 40mA, 5V 50mA and 5V 60mA
are available upon request.
Part Number Ordering Information
Part Number
MGA-16516-BLKG
MGA-16516-TR1G
No. of Devices
100
3000
Container
Antistatic Bag
Tape/reel
SLP4X4 Package Dimension
Pin 1 Dot
by marking
4.00 ± 0.10
4.00 ± 0.10
16516
YYWW
XXXX
0.203 Ref.
0.40 ± 0.05
0.30 ± 0.05
0.65 Bsc
0.00 - 0.05
0.85 ± 0.10
TOP VIEW
SIDE VIEW
Notes:
1. All dimensions are in millimeters.
2. Dimensions are inclusive of plating.
3. Dimensions are exclusive of mold ash and metal burr.
2.70 ± 0.05
Exp.DAP
1.95
Ref.
BOTTOM VIEW
PIN #1 IDENTIFICATION
CHAMFER 0.30 x 45º
2.70 ± 0.05
Exp.DAP
12