MGA-86563 Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – 0.5 - 6 GHz Low Noise GaAs MMIC Amplifier

MGA-86563
0.5 – 6 GHz Low Noise
GaAs MMIC Amplifier
Data Sheet
Description
Avago’s MGA-86563 is an economical, easy-to-use GaAs
MMIC amplifier that offers low noise figure and excel-
lent gain for applications from 0.5 to 6 GHz. Packaged in
an ultra-miniature SOT-363 package, it requires half the
board space of the SOT-143.
The MGA-86563 may be used without impedance match-
ing as a high performance 2 dB NF gain block. Alterna-
tively, with the addition of a simple shunt-series inductor
at the input, the device noise figure can be reduced to
1.6 dB at 2.4 GHz. For 1.5 GHz applications and above,
the output is well matched to 50 Ω. Below 1.5 GHz, gain
can be increased by using conjugate matching.
The circuit uses state-of-the-art PHEMT technology with
self-biasing current sources, a source-follower interstage,
resistive feedback, and on-chip impedance matching
networks. A patented, on-chip active bias circuit allows
operation from a single +5 V power supply. Current
consumption is only 14 mA, making this part suitable for
battery powered applications.
Surface Mount Package
SOT-363 (SC-70)
Features
x Lead-free Option Available
x Ultra-Miniature Package
x Internally Biased, Single +5 V Supply (14 mA)
x 1.6 dB Noise Figure at 2.4 GHz
x 21.8 dB Gain at 2.4 GHz
x
+3.1 dBm P at 2.4 GHz
1 dB
Applications
x LNA or Gain Stage for ISM, PCS, MMDS, GPS, TVRO, and
Other C band Applications
Equivalent Circuit
RF
NPUT
1
4
RF OUTPUT
AND V_d
Pin Connections and Package Marking
INPUT 1
6 GND
GND 2
5 GND
GND 3
4
OUTPUT
and V_d
Note:
Package marking provides orientation and identification.
"86" = Device Code
"x" = Date code character identifies month of manufacture
GROUND 2, 3, 5, 6
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Human Body Model (Class 0)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.