|
MGA-24106 Datasheet, PDF (1/19 Pages) Broadcom Corporation. – High-Gain, Low Current Low Noise Amplifier | |||
|
MGA-24106
High-Gain, Low Current Low Noise Amplifier
with Variable Current and Shutdown Function
Data Sheet
Description
Avago Technologiesâ MGA-24106 is a low-noise amplifier
(LNA) designed for GPS/ISM/WiMAX applications in the
(0.9-3.5) GHz frequency range. The LNA uses Avago Tech-
nologiesâ proprietary GaAs Enhancement-mode pHEMT
process to achieve high gain with very low noise figure
and high linearity. Noise figure distribution is very tightly
controlled. A CMOS-compatible shutdown pin is included
either for turning the LNA on/off, or for current adjust-
ment.
The low noise figure and high gain, coupled with low cur-
rent consumption make it suitable for use in critical low-
power GPS applications or during low-battery operation.
Component Image
Surface Mount 1.5x1.2x0.5 mm3 6-lead uDFN
PIN 1
PIN 6
PIN 2
AX
PIN 5
PIN 3
PIN 4
Top View
PIN 6: NC
PIN 1: Vsd
PIN 5: RFout/Vdd
GND
PIN 2: RFin
PIN 4: NC
PIN 3: NC[1]
Bottom View
Note:
Package marking provides orientation and identiï¬cation
âAâ = Product Code
âXâ = Year & work week of manufacture
[1] PIN 3 must be left unconnected
Attention: Observe precautions for han-
dling electrostatic sensitive devices.
ESD Machine Model = 50 V
ESD Human Body Model = 250 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Features
⢠Very Low Noise Figure : 0.97dB typical
⢠High Gain : 17.9 dB typical
⢠High IIP3 and IP1dB
⢠Advanced GaAs E-pHEMT
⢠Low external component count
⢠Shutdown current : < 5 uA
⢠CMOS compatible shutdown pin (SD) current at 2.7V
drawing 80uA
⢠Useable down to 1.8V supply
⢠Adjustable current via single external resistor/voltage
⢠Small package dimension: 1.5(L)x1.2(W)x0.5(H) mm3
Specifications (Typical performance @ 25°C)
At 1.575GHz
⢠Vdd = 2.7V, Vsd = 2.7V, Idd = 3.3mA,
â Gain = 17.9 dB
â NF = 0.97 dB
â IIP3 = -2.0 dBm, IP1dB = -9.7 dBm
â S11 = -9.3 dB, S22 =-13 dB
⢠Vdd = 3.3V, Vsd = 3.3V, Idd = 6.0 mA,
â Gain = 19.6 dB
â NF = 0.87 dB
â IIP3 = -0.2 dBm, IP1dB = -8.7 dBm
â S11 = -9.5 dB, S22 =-20 dB
Application
⢠LNA for GPS, Cellular, PCS , UMTS, WLAN, WiMAX, LTE
applications.
Vsd
Vdd
L1
RF in
L2
BIAS CIRCUIT
C2
L3
C1 RF out
|
▷ |