DEMO-MGA-1X516A Datasheet, PDF (1/16 Pages) Broadcom Corporation. – Low Noise, High Linearity Match Pair Low Noise Amplifier

MGA-16516
Low Noise, High Linearity Match Pair Low Noise Amplifier
Data Sheet
Description
Avago Technologies’ MGA-16516 is an economical, easy-
to-use GaAs MMIC match pair Low Noise Amplifier (LNA).
The LNA has low noise and high linearity achieved through
the use of Avago Technologies’ proprietary 0.25um GaAs
Enhancement-mode pHEMT process. It is housed in a
miniature 4.0 x 4.0 x 0.85mm³ 16-pin Quad-Flat-Non-Lead
(QFN) package. The compact footprint and low profile
coupled with low noise, high gain and high linearity make
the MGA-16516 an ideal choice as a low noise amplifier for
cellular infrastructure for GSM and CDMA. This device is
applicable to both Single and Balance mode. It is designed
for optimum use from 500MHz to 1.7GHz. For optimum
performance at higher frequency from 1.7GHz to 2.7GHz,
the MGA-17516 is recommended. Both MGA-16516 and
MGA-17516 share the same package and pinout.
Package Marking
Features
x 4.0 x 4.0 x 0.85 mm³ 16-lead QFN
x Low noise figure
x High linearity performance
x GaAs E-pHEMT Technology^[1]
x Low cost small package size: 4.0x4.0x0.85 mm³
x Excellent uniformity in product specifications
x Tape-and-Reel packaging option available
Specifications
850MHz; 5V, 50mA (typ) per section
x 17.7 dB Gain
x 0.4 dB Noise Figure
x 11.8 dBm Input IP3
x 18.3 dBm Output Power at 1dB gain compression
Pin 12
Pin 1
16516 Pin 11
Pin 2
YYWW
Pin 10
GND
Pin 3
XXX
Pin 9
Pin 4
TOP VIEW
BOTTOM VIEW
Note:
Package marking provides orientation and identification
“16516” = Device Code
“YYWW“= Year and Work Week
“XXXX” = Last 4 digit of Device Lot Number
Applications
x Low noise amplifier for cellular infrastructure for GSM
and CDMA.
x Other ultra low noise application.
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 60 V
ESD Human Body Model = 350 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.