English
Language : 

BCM5632 Datasheet, PDF (1/2 Pages) Broadcom Corporation. – 12 GIGABIT + 1 10-GIGABIT SWITCHING PROCESSOR
BCM5632
PRODUCT
®
Brief
12 GIGABIT + 1 10-GIGABIT SWITCHING PROCESSOR
BCM5632 FEATURES
• Supports 12 Gigabit ports and one 10-Gigabit uplink
in wirespeed operation
• Gigabit ports support TBI (1000BASE-X) or GMII
(1000BASE-T) interfaces
• Uplink supports XGMII interface for 10-Gigabit
• L2 search table supports 32K MAC addresses
• Jumbo Frame support (9 KB)
• Supports 4K VLAN address and 802.1s Multiple
Spanning Tree protocol
• Supports 802.1p and/or DiffServ with four priority
queues
• Supports 802.3ad link aggregation control protocol
(LACP) and marker protocol
• Supports selected MIB groups in RMON and SMON
• Supports up to 32K IP multicast groups with the
option to cross VLAN boundaries
• Full-duplex and half-duplex operation with IEEE
802.3x flow control and backpressure
• Built in 32-bit, 33-MHz PCI bus interface
• Flexible multiplexer modes
• Packaged in 785-pin BGA
SUMMARY OF BENEFITS
• Complete switch on a chip integrates 12 10/100/1000
and one 10G Ethernet Media Access Controllers
(MACs) supporting RMII, GMII, XGMII and TBI
interfaces, including multi-layer forwarding and
filtering logic and internal ARL tables and packet
buffering.
• Supports 32K internal MAC addresses, which are
shared by all ports. Multicast MAC addresses,
including IP multicast, can also be stored and
searched.
• Supports Quality of Service (QoS). Each output port
has four priority queues and their assignment can be
based on DiffServ TOS field or the 802.1p priority
field.
• Filters and forwards traffic at full wire speed on all 13
ports at all layers of functionality. This equates to
44 Gbps of bandwidth.
• Provides a mechanism to bundle together up to 12
ports at the same speed to form a port bundle or a
trunk group, establishing up to six trunk ports.
BCM5632 Switching Solution
Fiber
XCVR
or
BCM5402
Fiber
XCVR
or
BCM5402
Fiber
XCVR
or
BCM5402
Fiber XCVR
XAUI
BCM8011 XGMII
BCM5632
CPU Subsystem
System Bus