|
BCM5466SR Datasheet, PDF (1/2 Pages) Broadcom Corporation. – QUAD-PORT GIGABIT ETHERNET COPPER TRANSCEIVER WITH COPPER/FIBER MEDIA INTERFACE | |||
|
BCM5466SR
®
QUAD-PORT GIGABIT ETHERNET COPPER TRANSCEIVER WITH
COPPER/FIBER MEDIA INTERFACE
FEATURES
SUMMARY OF BENEFITS
⢠Four fully integrated 10BASE-T/100BASE-TX/1000BASE-T
Gigabit Ethernet transceivers
⢠RGMII, SGMII, and SerDes MAC interface options
⢠Copper or SerDes line interface options
⢠Fully compliant with IEEE 802.3, IEEE 802.3u, and
IEEE 802.3ab standards
⢠0.13-micron CMOSâlow power and cost
⢠Low power
⢠750 mW per port
⢠Advanced power management
⢠Trace matched output impedance
⢠Line-side loopback
⢠Low EMI emissions
⢠Cable plant diagnostics
⢠Cable plant analyzer function detects cable plant impairments.
⢠Link quality indication LED.
⢠Automatic detection and correction of wiring pair swaps, pair
skew, and pair polarity.
⢠Automatic MDI/MDIX crossover at all speeds
⢠Robust cable-sourced electrostatic discharge (CESD) tolerance
⢠Support for jumbo packets up to 10 kB
⢠IEEE 1149.1 (JTAG) boundary scan
⢠Package: 256-pin BGA
⢠Low-power quad-port integration enables single-row,
high-port-density switches.
⢠Lowers system costs by eliminating PCB layers required for
routing high-density solutions.
⢠Reduced I/O pin requirements with RGMII (over 50%), SGMII
(over 75%), and SerDes (over 80%).
⢠Clock timing can be adjusted to eliminate board trace delays
required by the RGMII specification.
⢠Lowers MAC/switch costs by reducing the number of pins
required to interface with the PHY.
⢠Flexibility for copper or fiber applications.
⢠Provides compatibility with IEEE standard devices operating
at 10, 100, and 1000 Mbps at half-duplex and full-duplex.
⢠Eases system level debug.
⢠Enables use of low-cost magnetics, even in high-density (48+)
designs.
⢠Cable diagnostic function characterizes cable plant condition
and immediately indicates cabling issues.
⢠Prevents erroneous equipment return due to bad cable plants
⢠Prevents manufacturing fallout due to bad cable plants
⢠Over 3kV of CESD tolerance prevents equipment damage and
return.
⢠Operates with larger packets for wider range of packet
protocol support and improved efficiency.
⢠Ease of manufacturing with JTAG support, simplified power
supply, and multiple MAC interfaces.
Switch/MAC
(BCM5690,
BCM5695)
RGMII
SGMII
SerDes
BCM5466SR System Diagram
BCM5466SR [1/4 SLICE]
Copper Energy
Detection
Copper
PHY
SerDes TR±
Signal Detect
Optical Mod
Ã4 sets
TRD±
Mag + RJ45
|
▷ |