|
BCM5464SA1IRBG Datasheet, PDF (1/2 Pages) Broadcom Corporation. – QUAD-PORT GIGABIT COPPER TRANSCEIVER WITH COPPER/FIBER MEDIA INTERFACE | |||
|
BCM5464S
®
QUAD-PORT GIGABIT COPPER TRANSCEIVER WITH COPPER/FIBER
MEDIA INTERFACE
FEATURES
SUMMARY OF BENEFITS
⢠Four fully integrated 10BASE-T/100BASE-TX/1000BASE-T
Gigabit Ethernet transceivers
⢠GMII, RGMII, SGMII, and SerDes MAC interface options
⢠Copper or SerDes line interface options
⢠Fully compliant with IEEE 802.3, 802.3u, and 802.3ab
standards
⢠0.13-micron CMOSâlow-power and cost
⢠Low-power
⢠750 mW per port
⢠Advanced power management
⢠Trace matched output impedance
⢠Line-side loopback
⢠Low EMI emissions
⢠Cable plant diagnostic
⢠Cable plant analyzer function detects cable plant impairments
⢠Link-quality indication LED
⢠Automatic detection and correction of wiring pair swaps, pair
skew, and pair polarity
⢠Automatic MDI/MDIX crossover at all speeds
⢠Robust cable-sourced electrostatic discharge (CESD) tolerance
⢠Support for jumbo packets up to 10 KB
⢠IEEE 1149.1 (JTAG) boundary scan
⢠Package: 354-pin BGA
⢠Low-power quad-port integration enables single-row, high
port density switches
⢠Lowers system costs by eliminating PCB layers required for
routing high density solutions
⢠Reduced I/O pin requirements with RGMII (over 50%), SGMII
(over 75%), and SerDes (over 80%)
⢠Clock timing can be adjusted to eliminate board trace delays
required by the RGMII specification
⢠Lowers MAC/switch costs by reducing the number of pins
required to interface to the PHY
⢠Flexibility for copper or fiber applications
⢠Provides compatibility with IEEE standard devices operating
at 10, 100, and 1000 Mbps at half-duplex and full-duplex
⢠Requires no air flow or heat sink
⢠Eases system level debug
⢠Enables use of low cost magnetics, even in high density (48+)
designs
⢠Cable diagnostic function characterizes cable plant condition
and immediately indicates cabling issues
⢠Prevents erroneous equipment return due to bad cable plants
⢠Prevents manufacturing fall-out due to bad cable plants
⢠Over 4kV of CESD tolerance prevents equipment damage and
return
⢠Operates with larger packets for wider range of packet
protocol support and improved efficiency
⢠Ease of manufacturing with JTAG support, simplified power
supply, and multiple MAC interfaces
BCM5464S System Diagram
Switch/MAC
(BCM5690,
BCM8842)
GMII
RGMII
SGMII
SerDes
BCM5464S [1/4 SLICE]
Copper Energy
Detection
Copper
PHY
SerDes TR+/-
Signal Detect
Optical Mod
X4 sets
TRD+/-
Mag + RJ45
|
▷ |